Shield Shield for Spark Core

The Spark Core is an Arduino-compatible, Wi-Fi enabled, cloud-powered development platform that makes creating internet-connected hardware a breeze. 

 

This shield is essentially an adapter that allows the user to connect Arduino compatible shields to the Spark Core. There are two functions that this shield performs: pin mapping of the Spark Core to the Arduino pin layout and voltage translation of 3.3V to/from 5V.

We use Texas Instruments TXB0108PWR to do the voltage translation in between Spark Core’s 3.3V logic level and Arduino’s 5V logic.

 

Due to the limited number of pin to function combinations, we have only mapped three analog channels A0, A1 and A2. Unlike other IO pins, the analog pins are rated at only a max of 3.3V and NOT 5.0V. Please remember NOT to exceed this voltage at anytime.

 

The shield has an onboard voltage regulator and can be powered from 7V to 15V DC. You could also power it via the USB plug on the Spark Core alone but the current would be limited to 500mA.

 

The pictures shows a robot shield interfaced with the Spark Core via the Shield Shield.

 

IMPORTANT: The Shield Shield does not map the Spark Core pins to like-numbered pins on the Arduino. In other words, D0 on the Spark Core is not the same as D0 on the Arduino. Please review the pin mapping table to the right and plan accordingly.

 

Arduino pin	Spark Core pin	Peripherals
0	RX
1	TX
2	D2
3	D0	PWM (analogWrite)
4	D3
5	D1	PWM (analogWrite)
6	A7	PWM (analogWrite)
7	D4
8	D5
9	D6
10	A2	SS
11	A5	PWM (analogWrite) / MOSI
12	A4	PWM (analogWrite) / MISO
13	A3	SCK
A0	A0	analogRead (ADC, 3.3V)
A1	A1	analogRead (ADC, 3.3V)
A2	A6	analogRead (ADC, 3.3V)

 

 

For more product information and technical support, please contact hello@spark.io