Prodotti

This is the USB-A Female Socket to 5-pin Terminal Block. If you need to connect to a device with a USB Jack, maybe make your own USB host connector...

A simple plug and play USB C to A converter (and vice-versa). This allows you to run devices and cables with the classic USB Type A connector off a...

This is the USB-A Male Plug to 5-pin Terminal Block. If you need to connect to a device with a USB Jack, maybe make your own USB stick or custom ca...

If your computer has a USB A port still, and you want a small, cable-less way to connect our modern USB C devices, this little dongle will do the j...

This is a wall adapter with a USB Type-C Connector that fulfills the 15.3W power requirements of the Raspberry Pi 4 and is the same power supply th...

This is a USB wall adapter with an input value of AC100-240V, and an output of 6V-6.5V/3A, 6.5V-9V/2A, 9V-12V/1.5A. Along with the wall adapter, th...

The adapter is supported in Linux distributions for OLinuXino boards.

  The USB-GPIO12 is a general purpose processor module using the PIC18F14K50. This chip has a USB module built in which we have used to implement M...

  USB-ISO is USB Full speed USB 2.0 compliant port isolator with 1000V isolation voltage. This device is very useful as protects your PC compute...

The USB-ISS  Multifunction USB Communications Module provides a complete interface between your PC and the I2C bus, SPI bus, a Serial port and gen...

The USB-ISS module is an enhanced version of our low cost USB-I2C module, offering additional functionality at the same low price. Communication to...

  Overview The USB-OPTO-RLY816 provides eight optically isolated inputs and eight volt free contact relay outputs with a current rating of up to 16...

Relays - 8 Isolated Inputs - 8Power - Powered from standard USB busControl interface - USB Input Voltage - 4.5v DC to 27v DCRelay current - Up to 1...

The USB-ProxSonar-EZ1 has a detection zone of ~5 feet and will allow for 8+ simultaneous sensors. The USB-ProxSonar-EZ ultrasonic proximity sens...

The MB1414 USB-ProxSonar-EZ1 sensor features one-inch resolution and serial data over an easy to use USB interface, providing both proximity and ra...

Powered and Controlled from the USB bus.Relays - 2 with integrated snubbing of the normally open terminalsPower - Powered from standard USB bus Con...

Powered and Controlled from the USB bus.Relays - 4 with integrated snubbing of the normally open terminalsPower - Powered from standard USB bus Con...

Powered and Controlled from the USB bus.Relays - 6 with integrated snubbing of the normally open terminalsPower - Powered from standard USB bus Con...

Powered and Controlled from the USB bus.The relays used on this board are premium ultra low power 50mW coil types, this means the boards current ...

The USB-RLY16 provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The processor is powered and instructed fr...

OverviewA low power version of the USB-RLY16 module, the USB-RLY16L is powered solely from the USB bus and provides eight volt free contact relay o...

The USB-RLY82 provides two volt free contact relay outputs with a current rating of up to 1Amp each. It is powered from any standard USB bus and ha...