MAGENTO IMPORT

The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different ch...

Have a project that needs some good power? Do you like free power provided by our friend, Mr. Sun? Check out this high quality, high output, fully ...

DOOR-LOCK IS ELECTROMAGNETIC DOOR LOCK. IT OPERATES WITH 12V DC, WHEN POWER IS APPLIED THE DOOR LOCK PIN IS MOVING INSIDE HOUSING, WHEN POWER IS RE...

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very r...

This Card Reader is not only a microSD(HC) card reader, but also SD(HC) memory card adapter. This adapter converts your micro SD(HC) memory cards ...

Is this not the cutest little display for the Raspberry Pi? It features a 3.2" display with 320x240 16-bit color pixels and a resistive touch overl...

OPEN SOURCE HARDWARE EMBEDDED MIPS LINUX SINGLE BOARD COMPUTER WITH RT5350F SOC 2.4GHZ WIFI 801.11N 150MB X5 100MB ETHERNET PORTS FEATURES 360 MH...

There are LEDs and then there are Build Upons LEDs. Each Build Upons PTH LED in this 10 pack are brick shaped in the same form of your favorite con...

Bus Blaster v3 is an experimental, high-speed JTAG debugger from Dangerous Prototypes. Thanks to a reprogrammable buffer, a simple update over USB ...

The 1.3" SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-re...

The H3LIS331DL is a low power high performance 3-axis linear accelerometer belonging to the “nano” family, with digital I2C serial interface standa...

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! Each EL wire looks a lo...

A20-SOM-EVB is reference design on 2 layer board for A20-SOM which adds VGA, HDMI, Audio In/Out, LCD, 2 Mpix Camera, Gigabit Ethernet, SATA, USB-OT...

The latest and greatest MiniPOV kit to hit the streets - MiniPOV4! We have added full color RGB LEDs to the kit as well USB programmability to make...

The RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Ardiuno combination with v...

The 3108 - K-Type thermocouple can take continuous temperature readings between -50°C to +800°C with a ±0.75°C accuracy. The 3108 can also take ...

Dynamixel MX servo for advanced applications, features an MCU with PID alghoritm control. This servo can rotate by 360° and continuosly. Communica...

  A compact PICAXE-28X2 module which contains the popular PICAXE-28X2 (PIC18F25K22) chip, voltage regulator, download socket, and reset switch in...

The PhidgetInterfaceKit 0/16/16 provides:   16 Digital Inputs - with hardware noise filtering - sensing up to 30VDC 16 Digital Outputs co...

The 1116 measures 3600 degrees of rotation - 10 full turns. It is typically used in Human Interface Applications such as control panels.   Comes p...

High quality brushed aluminum dual servo bracket. Used where you need to double the servos on a single axis for increased strength. Works great f...

    The USB Bit Whacker is a spectacular little development board featuring the PIC18F2553. Based on the work of Brian Schmalz, the UBW is a small ...

Datasheet (49K) PDF

The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the ...