devantech

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR88 is a WIFI connected relay module using the popular ESP32. It prov...

Controlled over WIFI using preprogrammed command sets or html page.Relays - 8 x 1A 30v outputs using a 50mW ultra efficient relayInputs - 8 x optic...

The ETH002 provides two volt free contact relay outputs with a current rating of up to 16Amp each. The module is powered from a 12vdc supply which ...

Controlled over Ethernet using simple TCP/IP commands.Relays - 2Power - 12V DC adaptor, supplied separatelyConfiguration & Test interface - HTT...

ETH002 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH002 ...

E' disponibile la nuova versione:  ETH008-B - 8 relay outputs at 16A   OverviewThe ETH008 provides eight volt free contact relay outputs with a cu...

Controlled over Ethernet using simple TCP/IP commands.Relays - 8Power - 12V DC adaptor, supplied separately.Configuration & Test interface - HT...

ETH008 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH008 ...

WARNINGMains Voltages can be Lethal.If you are not confident with using these voltages, please use a qualified electrician to wire this up for you....

The ETH0621 offers 6 digital inputs (accepting 10V - 24V), 2 independently switched 24V 5A outputs  and a 24 volt, 5A motor controller that effortl...

Controlled over Ethernet using simple TCP/IP commands.Relays - 10Analogue/digital Inputs - 16 inputs at 5v 10 analogue conversion or will report i...

Controlled over Ethernet using simple TCP/IP commands.Relays - 20Analogue Inputs (0-5v) - 16Power - 12V DC adaptor, supplied separately.Configurat...

Controlled over Ethernet using simple TCP/IP commands.Relays - 4Digital Switching I/O channels - 8Analogue Inputs - 4 x 3.3v 12 bit or 10 bit for b...

A good looking professional case for the ETH484 module. Includes mounting holes for fixing to a wall or back panel. This precision snap together ca...

The ETH8020-B is a drop in update of the ETH8020 with additional upgrades. The ETH8020 provides 20 volt free contact relay outputs with a current r...

ETH8020 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH802...

  Technical Specifications : Voltage 5V Current ...

  The ideal chip for adding general purpose I/O lines to the RF04/CM02, USB-I2C or any I2C based application. Features: Ideal for adding general p...

The I2C-LVL01 performs bi-directional I2C level conversion between any two levels: 1.65v to 5.5v.  The connection pins are on a standard 0.1" spaci...

The iceFUN module is powered from USB or an external 5v supply. There are on-board 3.3v and 1.2v regulators. All PIC and FPGA I/O pins are 3.3v...

iceWerx iCE40-HX8K FPGA 4 10-bit Analogue input channels via onboard PIC.63 FPGA I/O pins available (3.3 volt). iCE40 HX FPGA:7680 Logic cells128k ...

3 by 4 Keypad. (Telephone-type) You can use this 3x4 keypad to customize to your application! Size: 1,72" x 2.63" (43.8 x 66.7mm)      

Display - 16 characters per row, 2 rows Voltage - 5v only required Current - 40mA typ. with backlight on Modes - I2C or 9600 baud Serial Keypad - A...

OverviewThe I2C and serial display driver provides easy operation of a standard 20 x 4 or 16 x 2 LCD Text display. It requires only a 5v power supp...