Devantech

OverviewThe I2C and serial display driver provides easy operation of a standard 20 x 4 or 16 x 2 LCD Text display. It requires only a 5v power su...

OverviewThe I2C and serial display driver provides easy operation of a standard 20 x 4 or 16 x 2 LCD Text display. It requires only a 5v power supp...

Introduction The SRF05 is an evolutionary step from the SRF04, and has been designed to increase flexibility, increase range, and to reduce costs ...

Technical Specifications : Voltage 5V Current 30mA - 50mA Max Frequency 40 Khz Rang...

Controlled by modbus RTU over RS485, address, baud rate and parity set by dip switch. Relays - 8 VFC with snubbers on N/ODigital opto isolated inpu...

The MD04 is a medium power motor driver and is an upgraded replacement for the MD03, the main features are ease of use and flexibility. The motor's...

The MD14 is a medium power motor driver, designed to provide the easiest motor control possible to a single motor. Adjustments to speed and acceler...

  Designed to work with our EMG49 gear motors, the MD49 will drive two motors. Controllled by Serial Interface at 9600 or 38400 baud. Two modes of ...

The MIDI-RLY8 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays. ...

The MIDI-RLY8 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays. ...

The MIDI-RLY8 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays. ...

The MIDI-RLY8 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays. ...

Technical Specifications : Voltage 5V Current 15mA - 3mA Standby Frequency 40 Khz ...

  Mounting bracket for EMG49 Gear motor. It is made with 2mm thick strong aluminum for EMG49. Blue enamel finish. This product is sold individually.

The CM02 module, together with its companion RF04 module, form a complete interface between your PC and our range of I2C modules. You can send com...

A complete Robot Drive system, ready to integrate into your robot, comprising of an MD25 motor drive module, two EMG30  gearmotors  ...

RoboSpine does for your robot what your spinal chord does for you. It connects eyes and ears to the brain and the brain to the muscles. RoboSpine c...

The SRF485 is a single transducer ultrasonic ranger, based on our original SRF02 design. The SRF485 uses the RS485 standard for communications, for...

Note - This sonar has a waterproof transducer, not an underwater transducer. It is designed for operation in air. Speci...

  The SCR02 is a sensor controlled relay module capable of autonomous operation. The SRC02 may be connected to most of our ultrasonic rangers or to...

Technical Specifications : Voltage 3,3 .... 5,5V Current 11mA (25mA during ranging) Frequency ...

The SRF02 is a single transducer ultrasonic rangefinder in a small footprint PCB. It features both I2C and a Serial interfaces. The serial interf...

Ruggedised, Industrial, DIN rail mounting control moduleBuilt in snubbers for safe connection to inductive loads.Optically isolated inputs.Mains po...