Products

If you've got a lot of wire-stripping to do, you may want to try out an automatic stripper/cutter! They are fantastic for stripping and cutting st...

Take control of and monitor your world with our ultimate jack-of-all-trades Raspberry Pi HAT! We've pulled together a great set of features into...

This stepper motor is a little different than the large NEMA-17 types you may be used to. These are often used in gauges for motorcycles and cars ...

This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire, it's bet...

This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire, it\'s bette...

Atmel\'s ATmega328P 8-Bit Processor in 28 pin DIP package. It\'s like the ATmega168, with double the flash space. 32K of program space. 23 I/O lin...

Atmel\'s itty-bitty ATtiny85 8-Bit Processor. 8K of program space, 6 I/O lines, and 4-channel 10 bit ADC. Runs up to 20MHz with external crystal. ...

This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces. Cable is about 12\" long and mate...

AVR-ISP500-TINY is fast and reliable USB AVR programmer. It has two modes of work: STK500 compatible USB programmer and USB Mass storage. In ST...

ARDUINO Leonardo like board with ATMEGA32U4. Features: ATMEGA32U4 microcontroller, all in one USB communication no need for external FTDI ch...

Notes - Please read before purchasing! The SARA-R5 module in the AWS IoT ExpressLink SARA-R5 Starter Kit accepts the simplified AWS IoT ExpressLin...

DESCRIPTION - Exclusive gear set for DYNAMIXEL AX-18A - Compounded high strength engineering plastic is used. - No. 4 gear is made w...

Once you have seen an OLED display in use you will never want to use an LCD again! Much brighter display, much better viewing angle and lower cu...

This is the small 'serial interface' PCB that uses a PICAXE-18M2 chip to drive an LCD or OLED module (supplied as a self assembly kit). The incl...

Once you have seen an OLED display in use you will never want to use an LCD again! Much brighter display, much better viewing angle and lower cu...

The Baby Orangutan B-328 is a very compact but complete robot controller, packing a high-performance ATmega328P AVR microcontroller (with 32 KB of...

This is a background suppression photoelectric switch with 15mm-350mm adjustable detection range (can be adjusted by the knob). Its response time i...

Make your next project as you imagine it with prototyping perfboards that can easily be cut with scissors like these Bakelite Universal Perfboard ...

Build your very own programmable balancing robot with the Balboa 32U4 robot kit! The Balboa control board features an Arduino-compatible ATmega32U...

This is the control board for the Balboa 32U4 robot. It is included as part of the Balboa 32U4 Balancing Robot Kit and can be added to the Balboa C...

This kit gives you the structural pieces you need to build your own Balboa chassis with stability conversion. The chassis includes an integrated ba...