Products

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 73:1 metal gearbox with a 0.276"-long, 4 mm-diamete...

This board is a simple carrier of Allegro's ±30A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current...

This board is a simple carrier of Allegro's ±30A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current...

Keep your microcontroller tickin' with a ceramic oscillator. These little devices are bread-board friendly (0.1" pin spacing) and easy to use. The...

Keep your microcontroller tickin' with a fancy timing crystal. This 12.000 MHz model comes in an HC49/US 'short style' standard package and is bre...

The eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with clunky mec...

This eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with clunky m...

This board does exactly what it says on the box: It outputs a voltage between 0 and 4.2V with 1mV resolution. Many industrial controllers expect an...

Produce a voltage from 0 to 4.2 volts with this simple voltage output module.

These waterproof connectors allow you to attach 2 cables together while protecting the connection from the elements.

These waterproof connectors allow you to attach 2 cables together while protecting the connection from the elements.

These waterproof connectors allow you to attach 2 cables together while protecting the connection from the elements.

This high-quality 12.3MP camera module adopts Sony's IMX477R chip and requires a C or CS-mount lens to work. It is compatible with NVIDIA Jetson Na...

Notes: 1. This touch display is compatible with Raspberry Pi 4B & LattePanda 2 Alpha / 2 Delta / 3 Delta / Sigma, not compatible with LattePan...

Diameter = 4.75" Width = 2.375" Weight = 6.40 oz. it's at. Hubs = 6mm ( HUB-12 ) Motor = Any 6mm output shaft

This hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws...

The 1203 integrates a 20X2 White PhidgetTextLCD, and a PhidgetInterfaceKit 8/8/8 The PhidgetTextLCD allows you to display messages on a 2-...

Product Description The PhidgetTextLCD Adapter lets you connect one or two HD44780 LCD modules. The adapter can handle up to 4 lines of 40 ...

This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque...

This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque...

This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1000 mA at 2.7 V, allowing for a holding torqu...

This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1000 mA at 2.7 V, allowing for a holding torqu...

This compact, inexpensive plastic gearmotor ( high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. W...

This 120:1 gearbox with brushed DC motor has a low-current motor and provides power and speed that is comparable to an RC servo at a fraction of t...