Products

These 17 mm long aluminum adapters convert a 4 mm diameter shaft to a 12 mm hex shaft that compatible with many common hobby RC wheels. The set in...

These 20 mm long aluminum adapters convert a 6 mm diameter shaft to a 12 mm hex shaft that is compatible with many common hobby RC wheels. The set...

These 35 mm long aluminum adapters convert a 6 mm diameter shaft to a 12 mm hex shaft that compatible with many common hobby RC wheels. The set in...

These 35 mm long aluminum adapters convert a 6 mm diameter shaft to a 12 mm hex shaft that is compatible with many common hobby RC wheels. The set...

These 35 mm long aluminum adapters convert a 6 mm diameter shaft to a 12 mm hex shaft that compatible with many common hobby RC wheels. The set in...

We have a wide selection of laser-cut sprockets for use with the mini tank tracks . Sprockets consist of two or three plates screwed together to ac...

The EGM30 (encoder, motor, gearbox 30:1) is a 12v motor fully equipped with encoders and a 30:1 reduction gearbox. It is ideal for small or mediu...

Fed up with the noisy hummings of your mobile robot? Want higher torque output with current power voltage? This customized high quality DC motor is...

This is a beefy switching supply, for when you need a lot of power! It can supply 12V DC up to 5 Amps, running from 110V or 220V power (the plug i...

This is a really nice power supply. It's a switching DC supply so it's small and light and efficient. It is thin so it fits in power strips without...

This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 single p...

This is an inverter for EL wire and tape, similar to our pocket inverters, except it is a brick that takes 12V input instead of 2 AA batteries. Thi...

Here comes a really ultra thin low-power flexible LED strip! It only has a width of 2.5mm and thickness of 1mm. There are different colors, volt...

Here comes a really ultra thin low-power flexible LED strip! It only has a width of 2.5mm and thickness of 1mm. There are different colors, volt...

This is one of our favorite DFRobot customized high quality DC motor . It is a low noise motor and high torque output motor with hall encoder buil...

This is the motor and encoder portion of our 12V 37D mm metal gearmotors with 64 CPR encoders. It does not include a gearbox, but the pinion gear o...

Phidgets mostly run on 5V, but if you need 12V to power up your sensor you can use this adapter.

Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn\'t know how? Well, here\'s how: The 12V sole...

This is a 12V normally closed solenoid valve with no polarity distinction. It is normally closed until powered on. You can implement real-time wate...

This compact (0.32″×0.515″) switching step-up (or boost) voltage regulator efficiently generates 12 V from input voltages as low as 1.3 V and handl...

This compact (0.6″×0.6″) switching step-up (or boost) voltage regulator efficiently generates 12 V from input voltages as low as 1.3 V and handles ...

This powerful synchronous switching boost regulator efficiently generates an output voltage of 12 V from an input voltage as low as 2.9 V while us...