Products

This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-sh...

When a servo is operated under complex circumstances such as robot and model, it may get stuck, be burned, or damaged due to external forces, whi...

When a servo is operated under complex circumstances such as robot and model, it may get stuck, be burned or damaged due to external forces, whic...

XBees are so cute and tiny but if you're using them in a circuit you'll be annoyed to find that your classic 0.1" headers don't fit them! That's be...

This is a 10-pin header with 2mm pitch that mates with our [XBee socket](https://www.sparkfun.com/products/8272). It can be used for making \'dumm...

This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. Use this small part to avoid having to solder your preciou...

This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are currently using on our...

This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are currently using on our...

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector which ar...

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector which are...

Never get frustrated with 2mm-pitch modules again! Each one of these 25-pin female socket header packs contains 5 pieces of 25-pin, 2mm pitch head...

Never get frustrated with 2mm-pitch modules again! Each one of these 40-pin break-apart header packs contains 5 pieces of 40-pin, 2mm pitch headers...

This is a single-mode dual-core fiber jumper with a wire diameter of 2mm and a wire length of 50m. Equipped with ceramic ferrule SC-type connector...

2WD miniQ robotic platform is especially designed for students and hobbyists. It's versatile and small, suitable for most indoors applications. It ...

If you're looking for a compact solution for controlling a medium-sized stepper motor, the STC1003 is an affordable and convenient option. You can...

The DCC1003 gives you complete control of two DC motors of up to 4 amps each from one of the ports on your VINT hub . You can control motor velocit...

Control two DC motors from one VINT port with this compact motor controller.

This handy double-row, 34-pin 2x17 IDC Box Header is a slightly smaller version of the 2x20 pin IDC Box Header , often used for floppy disk drive ...

This DC Motor shield for Arduino uses L293 chip which allow to drive two 7-12V DC motors with maximum 1A current each channel. This shield can be...

We've got battery holders for all sorts of needs and projects! Waterproof? Here ya go . With an on/off switch? Easy peasy . Here's our latest addit...

This handy 2x20 IDC Box Header is the matching connector for our 40-pin GPIO Cable . By soldering this onto perf board you can run a GPIO cable fro...

Give yourself a lift with this 2x20 female socket header that has slightly longer than usual pins . You can plug this into your Raspberry Pi GPIO ...