Products

This black polyurethane scooter/skate wheel measures 84 mm (3.3″) in diameter and 24 mm (1″) in width and works with standard 608 bearings as well...

The ScoutMakes FM Radio Board is a great way to learn about the world of electronics. It is an I2C breakout board for the RDA5807 FM radio chip by ...

The SCR02 is a sensor controlled relay module capable of autonomous operation. The SRC02 may be connected to most of our ultrasonic rangers or t...

These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic Platform and its add-o...

Standard Philips-head 4-40 screws. They are 1/2\" long and come in packs of ten. This is the screw size we use in most of the holes for our breako...

There are your standard Philips-head 4-40 screws. They are 1/4\" long and come in packs of ten. This is the screw size we use in most of the holes...

These are standard screws with 2-56 thread and 3/8\" long, recommended for the small button pad sets. Can be used with a 2-56 nut. Sold in sing...

Screw shield is a wing-like shield that extends both sides of your Arduino or Arduino variants into sturdy and reliable screw terminal blocks. O...

The Arduino-Compatible Screw Shield is a terminal expansion board that can be screwed directly to the terminal on the thread and is reliable and co...

The Arduino-Compatible Screw Shield is a terminal expansion board that can be screwed directly to the terminal on the thread and is reliable and c...

The DFRobot Arduino-Compatible Screw Shield is a terminal expansion board that allows you to screw in jumper wires to a screw terminal for a much ...

Description: Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form a...

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you n...

This is a high quality 2-pin screw terminal. Very useful when you want to connect 24-18AWG wires to your circuits.

This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many...

These side-entry screw terminal blocks have a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on ...

These side-entry screw terminal blocks have a pitch of 3.5 mm (0.138″) . Each block has two terminals for the stripped ends of 24 – 18 AWG wires, a...

These top-entry screw terminal blocks have a pitch of 3.5 mm (0.138″) . Each block has two terminals for the stripped ends of 24 – 18 AWG wires, a...

These side-entry screw terminal blocks have a pitch of 5 mm (0.197″) . Each block has two terminals for the stripped ends of 22 – 14 AWG wires, an...

These top-entry screw terminal blocks have a pitch of 5 mm (0.197″) . Each block has two terminals for the stripped ends of 22 – 14 AWG wires, and...

These side-entry screw terminal blocks have a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on ...

These side-entry screw terminal blocks have a pitch of 3.5 mm (0.138″) . Each block has three terminals for the stripped ends of 24 – 18 AWG wires...

These top-entry screw terminal blocks have a pitch of 3.5 mm (0.138″) . Each block has three terminals for the stripped ends of 24 – 18 AWG wires,...

These side-entry screw terminal blocks have a pitch of 5 mm (0.197″) . Each block has three terminals for the stripped ends of 22 – 14 AWG wires, ...