Products

This is an 8000K pixels driver-free camera of USB port with up to 3264*2448 resolution. Based on the Sony IMX179 CMOS sensor, it supports autofocus...

Keep your microcontroller tickin' with a ceramic oscillator. These little devices are bread-board friendly (0.1" pin spacing) and easy to use. They...

Keep your microcontroller tickin' with a fancy timing crystal. This 8.000 MHz model comes in an HC49/US 'short style' standard package and is bread...

When you need a portable 12V power pack, this big holder will do the job! The holder will store 8 AA batteries end to end, to give approximately 12...

Make a portable power brick with plenty of juice! Use Alkaline AA's for a 12V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 9.6V supp...

Battery holder for eight AA cells arranged as two back-to-back four-cell holders. Details for item #1772 8-AA battery holder...

Battery holder for eight AA cells arranged as two back-to-back four-cell holders. Details for item #1161 8-AA battery holder...

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flashcards, and modes are 3.3V-only, many makers find tha...

This is an 8-channel single-end 12-bit analog data acquisition module with an accuracy of up to ±1‰, supporting 0-5V, 1-5V, 0-2.5V, 0-20mA, 4-20mA...

A Feather board without ambition is a Feather board without FeatherWings! This is the 8-Channel PWM or Servo FeatherWing , you can add 8 x 12-bit P...

A Feather board without ambition is a Feather board without FeatherWings! This is the 8-Channel PWM or Servo​ FeatherWing , you can add 8 x 12-bit...

This reflectance sensor module is designed specifically for use with Romi or TI-RSLK MAX robots based on the TI-RSLK Chassis Board v1.0. It featur...

This reflectance sensor module is designed specifically for use with Romi or TI-RSLK MAX robots based on the TI-RSLK Chassis Board v1.0, and it is...

These waterproof connectors allow you to attach 2 cables together while protecting the connection from the elements.

These waterproof connectors allow you to attach 2 cables together while protecting the connection from the elements.

These waterproof connectors allow you to attach 2 cables together while protecting the connection from the elements.

Note: The wiring color is random . This 8.9”1920x1200 IPS Touch Display is most suitable for Jetson Nano , Raspberry Pi 4B/3B+ and LattePanda . ...

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any ...

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any...

This 6.5" x 2.125" solderless breadboard has four bus lines each spanning the length of the board, and 63 rows of pins, enough for up to nine 14-pi...