Catalogues

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 330...

This is a unique two-cell AA battery holder. The 6" (~150mm) cable has been terminated with a JST-PH connector. We used to recommend using this ...

Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-makin...

These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header...

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female head...

These analog (RH) British Telecom connectors are primarily used by our English friends across the pond but here at SparkFun we like to use them for...

**Description**: This is your tried and true full size solderless breadboard! It has 2 split power buses, 10 columns, and 63 rows - with a total of...

These are standard 0.1\" spaced header pins that can be through-hole mounted. This header connects perfectly with most 8-pin male headers. This ...

An assortment of colored wires: you know it's a beautiful thing. Six different colors of stranded wire in a cardboard dispenser box. Sit this on y...

These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply p...

This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both en...

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positi...

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positiv...

This is a SMD 6 pin right angle male header. We use this header on our [LilyPad Main Board](http://www.sparkfun.com/commerce/product_info.php?prod...

This is a time saving kit of jumper wires - cut, stripped, and pre-bent for your prototyping pleasure. Included with this kit are 14 various length...

Your first exposure to electrical engineering - the bread board. Who knew it would bring so much frustration? This is your standard solderless ...

The SparkFun Qwiic Micro OLED Breakout is a Qwiic-enabled version of our popular Micro OLED display! The small monochrome, blue-on-black OLED scree...

The LCD Shield gives your OpenMV Camera the ability to display what it sees on-the-go while not connected to your computer. This shield features a ...

Building a weather station can be rewarding whether you\'re an agriculturalist, professional meteorologist, or weather hobbyist. Create your own w...

The MyoWare® 2.0 Muscle Sensor Development Kit is an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides you with all th...

The SparkFun QwiicBus Kit comes with everything you need to get started with the SparkFun QwiicBus system in one handy package. The kit includes t...

The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we\'ve assembled this...

The LilyPad Sewable Electronics Kit lets you explore the wonderful world of electronic sewing (e-sewing) and e-textiles through a series of introd...