Catalogues
Filters
Gravity: Electrochemical Ozone Sensor (0-10 ppm, I2C)
DFRobotGravity: I2C Ozone Sensor (0-10ppm) is based on electrochemical principles and it can measure the ambient O3 concentration accurately and convenien...
View full detailsGravity: PM2.5 Air Quality Sensor
DFRobotAs the most basic part of life, air is attracting more and more attention, for example, the most common PM2.5, PM1.0, PM10, etc. Keeping an eye o...
View full detailsGravity: I2C SCD41 Infrared CO2 Sensor (400 - 5000 ppm)
DFRobotCO2 is a key factor for indoor air quality as high levels compromise human cognitive performance and well-being. This Gravity: SCD41 CO2 sensor ...
View full detailsGravity: NH3 Sensor (Calibrated) - I2C & UART
DFRobotThis is a sensor that detects ammonia concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the f...
View full detailsGravity: CL2 Sensor (Calibrated) - I2C & UART
DFRobotThis is a sensor that detects chlorine concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the ...
View full detailsGravity: Factory Calibrated Electrochemical CO Sensor (0-1000 ppm, I2C & UART)
DFRobotThis is a sensor that detects carbon monoxide and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory...
View full detailsIndoor ENS160 Air Quality Sensor - I2C
DFRobotThis ENS160 Air Quality Sensor (I2C), based on ScioSense's new ENS160 sensor chip, is specifically designed for indoor air quality monitoring and o...
View full detailsGravity: Analog CO/Combustible Gas Sensor (MQ9)
DFRobotThis is an Arduino CO/Combustible Gas sensor. It uses MQ-9 to detect Carbon Monoxide. The sensor can be used to detect different gases containing C...
View full detailsGravity: Analog Electrochemical Carbon Dioxide Sensor (0-10000 ppm)
DFRobot"Greenhouse Effect" is melting the Earth ice core every minute and creating dangerous icebergs. By knowing the exact concentration of CO2(Carbon Di...
View full detailsGravity: Factory Calibrated Electrochemical SO2 Sensor (0-20ppm, I2C&UART)
DFRobotThis is a sensor that detects sulfur dioxide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated a...
View full detailsGravity: Factory Calibrated Electrochemical Ozone Sensor (0-10 ppm, I2C & UART)
DFRobotThis is a sensor that detects ozone concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the fac...
View full detailsGravity: Factory Calibrated Electrochemical Nitrogen Dioxide Sensor (0-20ppm, I2C&UART)
DFRobotThis is a sensor that detects nitrogen dioxide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated...
View full detailsGravity: H2S Sensor (Calibrated) - I2C & UART
DFRobotThis is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated...
View full detailsThreshold Formaldehyde HCHO Detection Sensor (0-20ppm)
DFRobotThis formaldehyde gas sensor differs from most gas sensors on the market as it does not provide specific gas concentration data. Instead, it detect...
View full detailsGravity: ENS160 Air Quality Sensor
DFRobotThis Gravity: ENS160 Air Quality Sensor, based on ScioSense's new ENS160 sensor chip, is specifically designed for indoor air quality monitoring a...
View full detailsGravity: HCL Sensor (Calibrated) - I2C & UART
DFRobotThis is a sensor that detects hydrogen chloride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrate...
View full detailsGravity: Factory Calibrated Electrochemical Hydrogen Sensor (0-1000ppm, I2C&UART)
DFRobotThis is a sensor that detects hydrogen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the ...
View full detailsGravity: PH3 Sensor (Calibrated) - I2C & UART
DFRobotThis is a sensor that detects phosphine concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the...
View full detailsGravity: HF Sensor (Calibrated) - I2C & UART
DFRobotThis is a sensor that detects hydrogen fluoride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrate...
View full detailsAir Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor)
DFRobotHealthy living starts with healthy air! As the most basic part of life, air is attracting more and more attention these years, for example, PM2.5,...
View full detailsFermion: MEMS Nitrogen Dioxide NO2 Gas Detection Sensor (Breakout, 0.1-10ppm)
DFRobotFermion: MEMS Nitrogen Dioxide NO2 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the s...
View full detailsGravity: Laser PM2.5 Air Quality Sensor For Arduino
DFRobotPM2.5 laser dust sensor is a digital universal particle concentration sensor,it can be used to obtain the number of suspended particulate matter in...
View full detailsAnemometer Kit 0-5V (IP65 grade)
DFRobotEver want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, ...
View full detailsWeather Station Kit with Anemometer/Wind Vane/Rain Bucket
DFRobotEver want to build your own weather station? This IoT weather station kit includes an anemometer , wind vane, and rain bucket . The serial communic...
View full details