Catalogues

This sturdy carrying case is great for carrying anything from tiny components to medium-sized tools. With its adjustable dividers, it could be use...

This is the same 10Ah battery pack that provides power to the [SparkFun Jetbot](https://www.sparkfun.com/products/16417)! The battery pack support...

This is a Screw Terminal with 3.5mm pitch pins. Comes in 2, 3, or 4 positions and have the really cool feature of slide-locking together to form an...

This is a super small, 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27...

This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm ...

Sometimes we want our projects on, but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while ...

Have you ever wanted to mount 5mm LEDs to the side of your board? We got these in for our RedBoard Edge and loved them. They are really just small...

Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard, your own 10-key, or j...

Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard, your own 10-key, or j...

Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard, your own 10-key, or ...

The SparkFun LiPo Charger Plus is the souped-up power option in the SparkFun line of single-cell lithium polymer (LiPo) battery chargers. With this...

These stackable headers are made to work with the [SparkFun ESP32 Thing Plus](https://www.sparkfun.com/products/14689) to connect to shield with a...

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are o...

This is a unique two-cell AAA battery holder built specifically for the [BBC micro:bit](https://www.sparkfun.com/products/14208). The 6" (~150mm) ...

This is a 40-pin surface mount FPC (Flat Printed Circuit) connector. Nothing too fancy here, except that it can be plugged in either way - contact...

This is a basic baseplate for the Raspberry Pi 3 B/B+. It is translucent in color and provides a simple mounting solution for wherever you want to...

The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the ...

You asked for more wires, so you are going to get more wires! This is a large kit of jumper wires - cut, stripped, and pre-bent for your prototypi...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 10...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 10K...

This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects! previous iterations of multicolor buttons, this pack\'s ...

This is a 500mm long 4-conductor cable with 1mm JST termination. It's designed to connect Qwiic enabled components together but can be used for ot...

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other...

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based...