Devantech

The USB-I2C module provides a complete interface between your PC and the I2C bus. The module is self powered by the USB cable and can supply up ...

Picmicro develop module, DIL format with Microchip USB HID bootloader preloaded. The module can be used on veroboards. Specifications 0.8" ...

Picmicro develop module, DIL format with Microchip USB HID bootloader preloaded. The module can be used on veroboards. Specifications 0.8"...

The MD14 is a medium power motor driver, designed to provide the easiest motor control possible to a single motor. Adjustments to speed and accele...

The WIFI008 provides 8 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which c...

dS1242 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS124...

Controlled over Ethernet using simple TCP/IP commands. Relays - 8 Power - 12V DC adapter, supplied separately. Configuration & Test interface ...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

If you have more than 32 devices on your DMX cable, you need to provide a Splitter/Buffer to maintain the DMX signal quality. This 4 Way Optically...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC ...

The iceFUN module is powered by USB or an external 5v supply. There are on-board 3.3v and 1.2v regulators. All PIC and FPGA I/O pins are 3...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR20 is a WIFI connected relay module using the popular ESP32. It p...

Technical Specifications: Voltage Separate terminals or from servo supply when 7.2v battery is used Number of Servant...

Powered and Controlled by the USB bus. Relays - 4 with integrated snubbing of the normally open terminals Power - Powered by standard USB bus Cont...

The USB-ISS module is an enhanced version of our low cost USB-I2C module, offering additional functionality at the same low price. Communication t...

Provides arc suppression for switching inductive AC loads on relays. The snubber can be simply wired across the common and switched contact to stop...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

dS378 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS378...

Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option of ASCII, Binary or Modb...

The BT004 provides four volt free contact relay outputs with a current rating of up to 16Amp each controlled over a HC06 Bluetooth serial port. Th...

ETH8020 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH...

Powered and Controlled by the USB bus. Relays - 6 with integrated snubbing of the normally open terminals Power - Powered by standard USB bus Cont...

iceWerx iCE40-HX8K FPGA 4 10-bit Analogue input channels via onboard PIC. 63 FPGA I/O pins available (3.3 volts). iCE40 HX FPGA: 7680 Logic ce...

The ideal chip for adding general purpose I/O lines to the RF04/CM02, USB-I2C or any I2C based application. Features: Ideal for adding gener...