Devantech

The WIFI008 provides 8 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which c...

If you have more than 32 devices on your DMX cable, you need to provide a Splitter/Buffer to maintain the DMX signal quality. This 4 Way Optically...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC ...

The iceFUN module is powered by USB or an external 5v supply. There are on-board 3.3v and 1.2v regulators. All PIC and FPGA I/O pins are 3...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR20 is a WIFI connected relay module using the popular ESP32. It p...

Powered and Controlled by the USB bus. Relays - 4 with integrated snubbing of the normally open terminals Power - Powered by standard USB bus Cont...

The USB-ISS module is an enhanced version of our low cost USB-I2C module, offering additional functionality at the same low price. Communication t...

dS378 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS378...

Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option of ASCII, Binary or Modb...

iceWerx iCE40-HX8K FPGA 4 10-bit Analogue input channels via onboard PIC. 63 FPGA I/O pins available (3.3 volts). iCE40 HX FPGA: 7680 Logic ce...

dS2832 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS283...

The MIDI-RLY8 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays....

Controlled over Ethernet using simple TCP/IP commands. Relays - 20 Analogue Inputs (0-5v) - 16 Power - 12V DC adapter, supplied separately. Conf...

Controlled over Ethernet using simple TCP/IP commands. Relays - 10 Analogue/digital inputs - 16 inputs at 5v 10 analogue conversion or will repo...

Developed in collaboration with Manu Systems , the WOR-R1 is a solid research base carrying the RD02 robot drive. There are slot cutouts in the bas...

Controlled over Ethernet using simple TCP/IP commands or MQTT. Built with Inductive load switching in mind.Ideal for solenoids, relays, valves and ...

The BT004BLE provides four volt free contact relay outputs with a current rating of up to 16Amp each controlled over a HM10 Bluetooth serial port....