Devantech

Note - This sonar has a waterproof transducer, not an underwater transducer. It is designed for operation in air. Specification ...

The DMX-USB-RX-D8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC or...

The RD03 is a powerfull Robot Drive system, ready to integrate into your robot, comprising of an MD49 motor drive module, two EMG49 gearmotors w...

Based around the fantastic BNO055 9 axis absolute orientation sensor from Bosch our module offers supply regulation and comms level translation, t...

Utilizing the fantastic AMG8833 thermopile array from Panasonic, the TPA64 offers an economical but powerful temperature imaging solution. Vi...

The DMX-USB-RX-A8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 18VAC su...

Controlled over Ethernet using simple TCP/IP commands. Relays - 4 Digital Switching I/O channels - 8 Analogue Inputs - 4 x 3.3v 12 bit or 10 bit f...

Powered and Controlled by the USB bus. Relays - 2 with integrated snubbing of the normally open terminals Power - Powered by standard USB bus Cont...

125mm diameter wheel with 8mm aluminum hub already fitted. Fits directly on EMG49 gear motor

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR88 is a WIFI connected relay module using the popular ESP32. It p...

The MD04 is a medium power motor driver and is an upgraded replacement for the MD03, the main features are ease of use and flexibility. The motor's...

The ETH8020-B is a drop in update of the ETH8020 with additional upgrades. The ETH8020 provides 20 volt free contact relay outputs with a curren...

Utilizing the fantastic AMG8833 thermopile array from Panasonic, the TPA64 offers an economical but powerful temperature imaging solution. ...

The SCR02 is a sensor controlled relay module capable of autonomous operation. The SRC02 may be connected to most of our ultrasonic rangers or t...

Picmicro develop module, DIL format with Microchip USB HID bootloader preloaded. The module can be used on veroboards. Specifications 0.8"...

The MIDI-RLY8 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays....

dS3484 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS34...

Technical Specifications: Voltage 5V Current 25mA Frequency 235Khz Range 10cm - 1.2m Beam Wi...

Controlled over Ethernet using simple TCP/IP commands. Relays - 2 Power - 12V DC adapter, supplied separately Configuration & Test interface -...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

The WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which ...

Powered and Controlled by the USB bus. The relays used on this board are premium ultra low power 50mW coil types, this means the boards curren...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC ...

dS2824 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS28...