Devantech

The CMPS12 is our 4th generation tilt compensated compass. Employing a 3-axis magnetometer, a 3-axis gyro and a 3-axis accelerometer. At the core o...

The USB-RLY82 provides two volt free contact relay outputs with a current rating of up to 1Amp each. It is powered by any standard USB bus and has ...

The EGM30 (encoder, motor, gearbox 30:1) is a 12v motor fully equipped with encoders and a 30:1 reduction gearbox. It is ideal for small or mediu...

The USB-RLY16 provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The processor is powered and instructed...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

ETH008 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH0...

Number of Relay's - 8 Power - 5v @ 100mA max. Control interface - Serial or I2C Relay current - ...

Overview The USB-OPTO-RLY816 provides eight optically isolated inputs and eight volt free contact relay outputs with a current rating of up to ...

The EGM49 is a 24v motor fully equipped with encoders and a 49:1 reduction gearbox. It is ideal for medium size robotic applications, providing ...

Overview A low power version of the USB-RLY16 module, the USB-RLY16L is powered solely by the USB bus and provides eight volt free contact relay o...

Providing easy mounting of the EMG30 to the robot, the bracket is made from a 2mm thick strong aluminum and finished in blue enamel.

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC ...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

A complete Robot Drive system, ready to integrate into your robot, comprising of an MD25 motor drive module, two EMG30 gearmotors with encoders,...

A good looking professional case for the ETH484 module. Includes mounting holes for fixing to a wall or back panel. This precision snap together c...

Technical Specifications: Voltage 5v logic supply and 5v - 24v for the motor Current 50mA Max for logic and up to 5A...

Technical Specifications: Voltage 12V Current Up to 2.8A for each motor Dimensions 71mm x 60mm Over...

Designed to work with our EMG49 gear motors, the MD49 will drive two motors. Controlled by Serial Interface at 9600 or 38400 baud. Two modes of ...

The USB-GPIO12 is a general purpose processor module using the PIC18F14K50. This chip has a USB module built in which we have used to implement ...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR42 is a WIFI connected relay module using the popular ESP32. It p...

Mounting bracket for EMG49 Gear motor. It is made with 2mm thick strong aluminum for EMG49. Blue enamel finish. This product is sold individuall...

The TSA01 is a voltage output temperature sensor module employing Microchip's MCP9700A sensor. Specification Operating Voltage...

The WIFI484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analogue inputs. The modu...