DFRobot

This is a high-quality electric solenoid lock with steel-made case and steel casting parts. It adopts solid and durable latch hook which assured a ...

This is a 150mm (5.91") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the s...

This mounting kit provides you different types of standoffs with screws and nuts which are most commonly used in our projects here at DFRobot. We ...

This rubber wheel is used in our popular 4WD mobile platforms . It can be mounted directly onto micro gear motors , but also compatible with our mo...

This is a 300mm servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo all...

This is a black braided cable guide. The braid provides some rigidity to the cables, also, it can be expanded by compressing it which will allow m...

This is a DFRobot exclusive! This is a high quality jumper cable. Hand made with 22AWG multistrand wire and sturdy male pins. Each jumper cable ha...

These are 8mm (0.31") ball bearings. They will fit on 8mm (0.31") rods.​

This High Speed ​​HDMI Cable provides a one-cable solution for your home entertainment needs. As a versatile HDMI cable, it provides high-definitio...

The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections.

This is a great magnifier for multiple purposes, circuit board and printing industry, medical science, gardening, coins and stamp, education, geogr...

This is a white spiral cable guide. This spiral makes it very easy to control your cables after they've already been plugged in, or when you have ...

Note: This pack includes 2 cables. This easy-to-wire double alligator clips to USB male adapter cable supports current below 3A and adopts 0.3...

Jumper wires are one of the most important gear components for the tinkerer. Often underestimated, but one of the first things to miss. If you are ...

This DC 5.5*2.1 one female to three male power splitter is a convenient and cost-effective way to power up 3 DC devices with one power source. Co...

eClip is an innovative programming/testing tool specially designed for Makers. It solves the problem of prototyping wearable projects with ICSP and...

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis...

Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in l...

This dual-purpose screwdriver has 2 types of heads: Straight and Phillips-tip. It uses complex vanadium steel that is hard and durable, which makes...

This DVI to HDMI converter is a convenient module for those using Embedded boards and testing on old monitors, It can be used just fine with other...

This is a power supply cable specifically designed for connecting SATA devices to the LattePanda Sigma Single Board Computer . It features a SAT...

This is a 10cm 18Pin FPC flat flex Ribbon cable specially designed for working with GDI. The cable is well durable and hard to be damaged even w...

A bunch of colorful nylon cable ties that help you bundle up things and make your project tidy. Comes in five vivid colors. They are: Faster -...

The DFRobot Soldering Starter Tool Set gives you everything you need for most soldering tasks. This set includes a 25-watt pencil iron, cast iron s...