DFRobot

The digital sensor cables are especially designed for our popular IO Expansion shield and sensors. It connects most of our digital sensor to the I...

This DVI to HDMI converter is a convenient module for those using Embedded boards and testing on old monitors, It can be used just fine with other...

This is a compact, spring loaded desoldering pump. It is a very useful tool for desoldering components from PCBs. ProsKit DP-366D Desoldering Pump...

This is a 3A USB 3.0 to Type-C cable supporting large current charging and data transfer, and compatible with all USB type-C-enabled mobile phones ...

2WD miniQ robotic platform is especially designed for students and hobbyists. It's versatile and small, suitable for most indoors applications. It ...

This is a Micro-HDMI video cable tailored to the Raspberry Pi 4B , supporting 4K HD resolution. There is no delay, no flash, the transmission is st...

This product converts from USB output to TTL output, supports three levels, facilitates communication between PC and serial port, does not need an...

This is a very basic double sided prototyping board with standard 0.1" spacing through holes and four 3mm diameter mounting holes. There are 22x2...

This is a medium size breadboard with 600 tie points. It has strong, self-adhesive backing. It is ideal for high frequency and low noise circuits.

The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded sol...

This is an Arduino rotation potentiometer, it is able to rotate up to 300-degree. With the Arduino IO expansion board, in combination, it can be ve...

The Analog Voltage Divider V2 can detect the supply voltage from 0.0245V to 25V. This module is based on resistor divider principle. The voltage d...

In many cases, electrical isolation is required to ensure the reliable operation of the sensors. Some sensors, such as pH sensors and conductivity ...

Ionizing radiation, an invisible and intangible enemy, exists not only in nuclear power plant reactors. In fact, we are bombarded by radiation fro...

Infrared break-beam sensors are a simple way to detect motion. This IR break beam sensor works up to 50cm with a fast and stable response of ＜2m...

The ESP32-S2-Kaluga-1 is a development kit mainly designed for human-computer interaction applications. It includes one main-board and four extensi...

The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the sa...

This is a Type-C Lipo charger designed for single-cell 3.7V lithium battery. The compact size makes it easy to integrate into your applications. Th...

Are you still distressed that industrial sensors can't be used on the Arduino ? You may need to get a converter just like this! This 12V to 3.3V ...

The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded sol...

For guys who are interested in pneumatic system, hydraulic system, inflation equipment, or air compressing, this is a really practical valve for y...

This small 12~24V to 5V 3A dual USB power step-down converter supports all 5V main controllers. Its two USB ports can output 5V/3A at the same tim...

Small and exquisite, this 0.96” TFT screen employs an edge-to-edge design and offers glorious 160×80HD 16-bit color display, which can be suitable...

This wireless charging module, composed of transmitting and receiving ends, can transfer energy through media such as air, paper, or plastic. Based...