DFRobot

The H3LIS200DL is an ultra low-power(down to 10uA) and low noise 3-axis accelerometer. It has user selectable scales of ±100g/±200g and is capable ...

The LIS2DW12 is an ultra-low-power high-performance three-axis linear accelerometer. It has user-selectable full scales of ±2g/±4g/±8g/±16g and is ...

The LIS2DW12 is a low power high-performance three-axis linear accelerometer, featuring low power (50 nA), low noise (1.3 mg RMS), 32 FIFO, ±2g/±4...

The ICG-20660L is a high-precision 6-axis IMU module that integrates a 3-axis accelerometer(±2/4/8/16g), a 3-axis gyroscope(±125/250/500dps), and ...

The CMPS12 is our 4th generation tilt compensated compass. Employing a 3-axis magnetometer, a 3-axis gyro and a 3-axis accelerometer. At the core o...

This is a three axis accelerometer for the LilyPad system. Based on the ADXL335 accelerometer from Analog Devices, the LilyPad Accelerometer can d...

This is a package of crimp pins for female housing pins with the pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-s...

This wire connector set is made by flame retardant material. It works very well in extreme environments.

This is quality DB9 Male Connector that with solder tail package. DB9 connector is widely used for serial communication RS232, RS485 and RS422 inte...

This is quality DB9 female Connector that with solder tail package. DB9 connector is widely used for serial communication RS232, RS485 and RS422 i...

A row of right angle headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.

This is a blue colored 40 Pin 2.54 mm（0.1"） single row pin header strip from DFRobot. These 0.1" header strips are commonly used as low-cost Ardu...

This is a 1-pin female housing pin with the pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced pins. NOTE: Doe...

This is an 8-pin female header which is used on Arduino board.

This product includes 3-pin 2.0mm(0.08") mating connector housing(10 units) and crimp pins (30 units). They work with wires ranging from 28 to...

This is a 2-pin female housing pin with a pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced pins. NOT...

This kit includes XH-2, XH-3, and XH-4 housing (20 units each), through-hole type shrouded header (20 units each), and crimp contact (100 units).

This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units).

This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units). They work with wires ranging from 28 to 26 AWG.

This is a 4-pin female housing pin with a pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced pins. NOT...

This is a 3-pin female housing pin with the pitch of 2.54mm(0.1"). You can make customized cables that mate with 0.1"-spaced pins. NOTE:...

This is an 8-pin female header, with extra long legs -- great for stacking Arduino shields.

This is an 8-pin female header, with extra long legs -- great for stacking Arduino shields.Pins are spaced by 0.1".

This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields.