Skip to content

Language

SKU 808025

Universal Qi Wireless Charging Transmitter

Sold out
Original price €43,66 - Original price €43,66
Original price
€43,66
€43,66 - €43,66
Current price €43,66

All prices are VAT included

Availability:
Out of stock
Request Quantity Discount and Information

If you have a modern smart phone you may have noticed that it comes with built in wireless charging capability called 'Qi charging.' Qi is a trademark name for a thin and smart inductive charging system . Many large gadget companies have standardized on Qi, which means it's easy to find a charging dish and we thought it might be cool if your Arduino project can recharge itself wirelessly.

We've added a ton of Qi receivers but, until now, we haven't had a charging base. No longer! This is a super simple Qi transmitter. It will work with any standard Qi charger receivers. You just connect the board to a 5v power supply - either through a micro USB port - then put your device w/ Qi receive onto the base. If you want to 'share' the microUSB power connection, you can also connect directly to the USB-A port

Maximum output is around 5W which is good for most smart phones, basically 1000mA charge at 5V on the other side of the wireless connection. It has a charging distance of 2-8mm, works with all our Qi charge receivers. You can only use one receiver per transmitter so if you want to charge two Qi devices at once, you'll need 2 transmitters.

  • Input: 5V
  • Input Current: 2A
  • Maximum output power of 5W
  • Operating Frequency: 100-200Khz
  • Charging Distance: 2-8mm
  • Charging Plate Dimensions: 53mm x 53mm x 4mm / 2.1" x 2.1" x 0.2"
  • PCB Dimensions w/ Components: 55mm x 37mm x 6mm / 2.2" x 1.5mm x 0.2"
  • Weight: 47g