Electronics

That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output...

This is a kit that provides you with a basic assortment of capacitors to start or continue your electronics tinkering. No more looking under your ...

CPT-C5 is a power converter module output 5V. Low heat, adopt synchronous rectification technology (5A long-term without any additional cooling me...

We have no idea what USB device you are hooking up to, but if you want to access the microUSB port on something, you might want this. We broke out ...

The compact (0.5″ × 0.7″) D24V10F5 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 5 V while...

This simple board breaks out a female USB type A connector's VCC, GND, D- and D+ pins to a 0.1" pitch header. If you want to add a USB to your pro...

The compact (0.4″ × 0.5″) D24V5F5 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 5 V while a...

This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! So now you can get ...

These two Short Male Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are par...

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board me...

Set composed of 4 male Deans plugs and 4 Deans sockets + red/black heat-shrink sheath

The compact (0.5″ × 0.7″) D24V10F3 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 3.3 V whi...

This is a simple LED-illuminated tactile button with a green cap. It's just like a basic tactile button, but it lights up red! So now you can ge...

New automatic and universal FullPower battery charger, designed for use from both 220V and 12V landlines, controlled by a microprocessor and with ...

The Raspberry Pi B+ has landed on the Maker World as a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use m...

This is a board designed for opto-isolation . This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage o...

These two Short Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are pa...

The NCP1402 is a 3.3V DC-DC converter. The breakout board will accept voltage inputs between 1 and 3 Volts (such as 1 or 2 AA batteries) and outpu...

This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets th...

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The USB LiPo Charger is a basic charging circuit that...

New automatic and universal FullPower battery charger, designed for use from both 220V and 12V landlines, controlled by a microprocessor and with ...

Do you need that extra push over the cliff? The Medium sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to...

Stack multiple plates, breakouts etc onto your Raspberry Pi with this custom-made extra-tall and extra-long 2x13 female header. The female header ...