Electronics

The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery, has sold...

Set of 5 new type Deans sockets with red/black heat shrink. It is the same connector that is mounted on the battery.

This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini. Pick up a few of these to break out all...

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V. The board m...

This is a set of ceramic capacitors. Very handy for experiments and home cooked circuit board. This pack comes with 25 sets of capacitors with va...

This 12 position terminal block provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed togeth...

Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when...

Oof - you got a Raspberry Pi Model A+ or B+ that you want to have work with some old kit or plate or breakout or something and it uses the classic...

This is 50g of high quality, Lead-Free Solder Paste, the perfect amount to keep around for prototyping and hobby projects that require a bit of SM...

DIP-8 Optocoupler. High Speed ​​optocoupler, low input current, photodiode Darlington Output Documents Datasheet

This is a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the...

These motorized sliders are very cool. Each is essentially a standard slide pot which is belt-driven by a small motor. The slide contains tw...

This 2x20-pin strip male header is a great way to add pins to 2x20 0.1" holes in a PCB. They're also perfect companion piece to our 2x20-pin right...

This is a 20W adjustable DC-DC buck converter module with digital display. It is based on LM2596 3A step-down voltage regulator and supports an in...

This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. We use four 4/40-0.5" size screws matched ...

This 3 position terminal block provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together...

The S9V11F5 switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2 V and 16 V. (Note: it requires an input vo...

This Mini Illuminated Momentary Power Button is an adorable breadboard-friendly tactile switch that has a built-in LED. It provides a simple way t...

This is a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the...

The Raspberry Pi B+ has landed on the Maker World as a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use mo...

If you have a modern smart phone you may have noticed that it comes with built in wireless charging capability called 'Qi charging.' Qi is a trade...

This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of...

The S7V8F3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V output from input voltages between 2.7 V and 11.8 V. Its abilit...