Electronics

The NCP1402 is a 3.3V DC-DC converter. The breakout board will accept voltage inputs between 1 and 3 Volts (such as 1 or 2 AA batteries) and outpu...

High quality potentiometer. L = 15mm

This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with our 6-pin IDC cable. It comes in two parts, a 'pin-through...

This powerful step-up/step-down regulator efficiently produces a fixed 12 V output from input voltages between 3 V and 30 V while allowing a typic...

This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets th...

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching swi...

This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button, but it lights up red! So now you can ge...

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The USB LiPo Charger is a basic charging circuit that...

New automatic and universal FullPower battery charger, designed for use from both 220V and 12V landlines, controlled by a microprocessor and with ...

This is a 35mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. Features: ...

Do you need that extra push over the cliff? The Medium sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to...

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching swi...

This is a 35mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. Features: ...

Stack multiple plates, breakouts etc onto your Raspberry Pi with this custom-made extra-tall and extra-long 2x13 female header. The female header ...

This is a right-angle, 24-pin Molex Mini-Fit Jr.™ connector, commonly used as the power supply connector on ATXmotherboards. Two rows of twelve ...

This connector, a smaller version of the female Tamiya plug , is commonly used with battery packs for RC applications. The connector is keyed so t...

These two Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! What do they do? They get...

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board me...

High quality potentiometer. L = 15mm

These devices consist of four independent, highgain frequency-compensated Norton operational amplifiers that were designed specifically to operate...

This is a 3.5mm TRRS SMD audio jack. TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards...

This 2x5 crimp connector snaps onto a 10-pin ribbon cable to form a dual-inline connection that can be pushed right into a breadboard. Docume...

This is a common SMD barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5mm jack, with a 2.1mm...

This is a tin that thanks to the low melting temperature, the exceptional flux and the 60/40 composition; It has exceptional characteristics of ea...