SKU 420106
Gearmotor 6Vdc 52RPM Encoder
by Motors
Original price
€15,59
-
Original price
€15,59
Original price
€15,59
€15,59
-
€15,59
Current price
€15,59
All prices are VAT included
Availability:
in stock, ready to be shipped
SIX POLES MAGNET: THREE PULSES FOR MOTOR TURN HALL-EFFECT SWITCHES
These Hall-effect switches are highly temperature stable and stress-resistant sensors best utilized in applications that provide steep magnetic slopes and low residual levels of magnetic flux density. Each device includes a voltage regulator, quadratic Hall voltage generator, temperature stability circuit, signal amplifier, Schmitt trigger and open collector output on a single silicon chip. The on-board regulator permits operation with supply voltages of 4.5 to 24 V. The switch output can sink up to 20 mA with suitable output pull up, they can be used directly with bipolar or MOS logic circuits.
- VDR interference suppression on the collector
- Direction of rotation depending on polarity
- Can be mounted in any position
- Maximum radial shaft load: 10N
- Maximum axial shaft load: 5N
- Temperature range: -20°C/60°C
- Works with the 600 060 motor mount
- Works with: Motor Mind B and the 3A Motor Controller
| Technical Specifications: | ||
| Item # | 420106 |
|
| Nominal Voltage Vdc | 6 |
6 |
| No Load Current mA | 30 |
30 |
| Max Current mA | 85 |
85 |
| Max Torque Kg/cm | 0.38 |
0.81 |
| Reduction Ratio | 43.3:1 |
90.3:1 |
| No Load Speed RPM | 52 |
25 |
| Speed at Max Torque RPM | 32 |
13 |
| Shaft Diameter mm | 4 |
4 |
| Length mm | 41 |
41 |
| Weight gr | 55 |
55 |
 |
| Encoder Technical Specifications: | |
| Supply Voltage | 4.5 ... 24 Vdc |
| Output Saturation Voltage | 150 ... 400 mV |
| Output Leakage Current | <1 ... 10 µA |
| Supply Current | 4.7 ... 8 mA |
| Output Rise Time | 0.04 ... 2 µs |
| Output Fall Time | 0.18 ... 2 µs |
|
