MAGE 2

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed DC motor with 298:1 metal gearbox, similar to Sanyo's popular 12 mm gear...

The S7V7F5 switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2.7 and 11.8 V. Its ability to convert both h...

This breakout board makes it easy to use Toshiba's TB67S249FTG microstepping bipolar stepper motor driver, which features adjustable current limiti...

The compact (0.4"×0.6") D24V6ALV switching step-down (or buck) voltage regulator takes an input voltage between 4.5 and 42 V and efficiently red...

The compact (0.4"×0.6") D24V3AHV switching step-down (or buck) voltage regulator takes an input voltage between 4.5 and 42 V and efficiently red...

The A-Star 32U4 Mini SV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step...

These aluminum gearmotor brackets let you securely mount Pololu's 25D mm metal gearmotors to your project. The brackets are sold in pairs , and ea...

This tiny logic level shifter features four bi-directional channels, allowing for safe and easy communication between devices operating at differen...

This I²C extender board from SJTbits enables the operational range of an I²C bus to be extended significantly. By transparently converting the data...

The Pololu step-up/step-down voltage regulator S10V4F5 is a switching regulator (also called a switched-mode power supply (SMPS) or DC-to-DC conve...

This 75 cm (30″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-e...

This 12 cm (4.5″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-e...

This 30 cm (12″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-e...

This black polyurethane scooter/skate wheel measures 200 mm (7.9″) in diameter and 30 mm (1.2″) in width and works with standard 608 bearings as w...

This black polyurethane scooter/skate wheel measures 144 mm in diameter and 29 mm in width and works with standard 608 bearings as well as our A...

This black polyurethane scooter/skate wheel measures 70 mm in diameter and 25 mm in width and works with standard 608 bearings as well as our Al...

This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making it a great choice for ...

This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has a cross section of 10...

This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10...

This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 ...

This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has a cross section of 10 ×...

This breakout board makes it easy to use Toshiba's TB67S279FTG microstepping bipolar stepper motor driver, which features adjustable current limiti...

This breakout board for TI's DRV8880 microstepping bipolar stepper motor driver features adjustable current limiting, overcurrent and overtemperatu...

The S9V11MA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lo...