MAGENTO IMPORT

These Male/Male Jumper Wires are handy for making wire harnesses or jumping between headers on PCB's. These premium jumper wires are 6" (150mm) lon...

These female-female jumper wires are handy for making wire harnesses or jumping between headers on PCB's. These premium jumper wires are 6" (150mm)...

New! Version 3 comes with the latest module which has external antenna support and Pulse-Per-Second output We carry a few different GPS modules ...

The original Adafruit Motorshield kit is one of our most beloved kits, which is why we decided to make something even better. We have upgraded the ...

Trinket may be small, but don't be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lo...

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch over...

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 20 (2...

These female-female premium jumper wires are handy for making wire harnesses or jumping between headers on PCB's. They're 3" (75mm) long and come i...

Trinket's got a big sister in town - the Pro Trinket 5V ! Pro Trinket combines everything you love about Trinket with the familiarity of the commo...

For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 s...

*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe mo...

Connect this to that with a set-screw coupler. These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexibl...

The AM2302 is a wired version of the DHT22, in a large plastic body. It is a basic, low-cost digital temperature and humidity sensor. It uses a cap...

These Female/Female Jumper Wires are handy for making wire harnesses or jumping between headers on PCB's. These premium jumper wires are 12" (300mm...

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible I...

Connect this to that with a set-screw coupler. These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexibl...

Make your own little LED strip arrangement with this stick of NeoPixel LEDs. We crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB ...

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are a little over 6" (150mm) long and come in a ...

Connect this to that with a set-screw coupler. These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexibl...

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find t...

New! we are now carrying an 'assembled' version of this shield, with all the components pre-soldered. NOTE: You will only need to solder on either...

Now that you've finally got your hands on a Raspberry Pi® , you're probably itching to make some fun embedded computer projects with it. What you n...

Trinket may be small, but don't be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot...

Round and round and round they go! 16 ultra bright smart LED NeoPixels are arranged in a circle with 1.75" (44.5mm) outer diameter. The rings are '...