MAGENTO IMPORT

This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org . Each button has a hole underneath t...

These are 300mm long jumpers with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header...

This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provides you w...

The SparkFun 9DoF Sensor Stick is an easy-to-use 9 Degrees of Freedom IMU. The Sensor Stick deftly utilizes the LSM9DS1 motion-sensing system-in-a...

The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature. It has the ability to read multiple types of...

The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi...

You've always wanted to output analog voltages from a microcontroller, the MCP4725 is the DAC that will let you do it! The MCP4725 is an I 2 C con...

This is the LM3914 Dot/Bar display analog-controlled LED driver that uses an alinear output scale. With this driver all it takes is a single, analo...

The Bluetooth Mate Gold is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduin...

These are 300mm long jumpers terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be install...

Light pipe is very cool stuff. It transmits light along its length, like fiber optic cable, but it also "leaks" light along the way, causing the en...

The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. This...

This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-...

The Raspberry Pi B+ is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect ...

This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character LCDs. Each pin has a ...

The BlueSMiRF is the latest Bluetooth wireless serial cable replacement from SparkFun Electronics! These modems work as a serial (RX/TX) pipe. Any ...

This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini. Pick up a few of these to break out all...

Now mounted on a breakout board, the MPL115A1 is a digital barometric pressure sensor that uses MEMs technology to give accurate pressure measu...

The Teensy is an amazing and compact development platform in a breadboard friendly form factor, but what if you could incorporate it into the Ardu...

The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery, has sold...

The LIS3DH Breakout is a smart, low-power, three-axis, capacitive micro-machined accelerometer with 12 bits of resolution that you can use to add t...

This 12 position terminal block provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed togeth...

The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats) audio dec...