MAGENTO IMPORT

The squarish board with two chips on it is the transmitter (power with 9V). The longer board is the output and you can connect that to the part o...

No really - it's 6 inches (153mm) tall! This very large 7-segment display can be seen from a hundred feet away. So many projects to try, so little...

Our SCC2433-B solar cell is a monocrystalline cell offering 4.5V (open circuit) and 18mA (short circuit) in a 24x33mm package. What really ma...

The USB-RLY82 provides two volt free contact relay outputs with a current rating of up to 1Amp each. It is powered by any standard USB bus and has ...

The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over a +10°C to +45°C tempe...

It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's re...

I know squishy! These silicone elastomer keypads are just waiting for your fingers to press them. Go ahead, squish all you like! (They're durable a...

Grove - Bee Socket is an adapter of Xbee serials which can connect wireless modules with Arduino, such as WIFI Bee, RF Bee, Bluetooth Bee, etc. It ...

EL Inverters, if you are wanting to do anything with EL lighting you need one, period. This 3V EL Inverter is a special type that is intended to be...

Grove - I2C ADC is a 12-bit precision ADC module based on ADC121C021. It helps you increase the accuracy of value collected from analog sensor...

Charging cable with DEANS connection

This 350cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hu...

The eTape Liquid Level Sensor from Milone Technologies is a great way to measure the level of a liquid. It has a resistive output that varies with ...

The USB-RLY16 provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The processor is powered and instructed...

The 7” Touchscreen Display for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment system...

This it the SparkFun RFID Starter Kit, an all-in-one kit that offers everything you need to get your next RFID project off the ground. This kit inc...

The AD8232 Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity ...

The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. It is suitable for medium powered robo...

This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org . Each button has a hole underneath ...

This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator ...

The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level shifting har...

This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org . Each button has a hole underneath t...

These are 300mm long jumpers with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header...