MAGENTO IMPORT

4N35 general purpose optocoupler. The general purpose optocouplers consist of a gallium arsenide infrared emitting diode driving a silicon phototr...

These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header...

There are two giant upgrades in the Pi 3. The first is a next generation Quad Core Broadcom BCM2837 64-bit ARMv8 processor, making the processor sp...

The Model B+ is the higher-spec variant of the Raspberry Pi. It replaced the original Model B in July 2014. Compared to the Model B it has: ...

Side-looking Infrared Emitters and IR Detectors. These simple devices operate at 940nm and work well for generic IR systems including remote contr...

The Arduino Sidekick Basic Kit is designed to be used with your Arduino / Seeeduino / Seeeduino ADK / Maple Lilypad or any MCU board. It contain...

The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible...

Introduction The SRF05 is an evolutionary step from the SRF04, and has been designed to increase flexibility, increase range, and to reduce cost...

Trinket may be small, but don't be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lo...

This little round on/off rocker switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It'll also look pretty slick...

It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bo...

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch over...

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things ...

This Grove-ultrasonic sensor is a non-contact distance measurement module which is compatible with the Grove system. It's designed for...

If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.25W, 8Ohm speaker is only 40m...

Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for measuring whole building...

This Moisture Sensor can be used to detect the moisture of soil or judge if there is water around the sensor, let the plants in your...

This product is a high accuracy temperature and humidity sensor used in home conditions. It consists of a capacitive sensor e...

These are nice, solid curved tweezers. They have a very fine tip which allows you to pick up very small parts with precision. This is a great to...

Potentiometers are incredibly useful, whether you're controlling the volume on your stereo or the 'mood lighting' in your room. The problem with...

If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun bi-directional logic level converte...

These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Features: Step Angle (deg...

The S7V7F5 switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2.7 and 11.8 V. Its ability to convert both h...

These female-female premium jumper wires are handy for making wire harnesses or jumping between headers on PCB's. They're 3" (75mm) long and come i...