MAGENTO IMPORT

125mm diameter wheel with 8mm aluminum hub already fitted. Fits directly on EMG49 gear motor

Note: This revision of the 1065 comes with a built-in heat sink for the driver chip to prevent it from overheating. The 1065 lets you control th...

Controlled over Ethernet using simple TCP/IP commands. Relays - 8 Power - 12V DC adapter, supplied separately. Configuration & Test interface ...

Powered and Controlled by the USB bus. Relays - 2 with integrated snubbing of the normally open terminals Power - Powered by standard USB bus Cont...

The PhidgetBridge lets you connect up to 4 un-amplified Wheatstone bridges, such as: Strain gauges Compression load cells Pressure sensors...

The PhidgetRFID Read-Write reads RFID tags that are brought in close proximity to the reader and returns the tag identification number. Writing da...

Aww yeah, it's the Feather you have been waiting for, and now with stacking headers ! The HUZZAH32 is our ESP32-based Feather, made with the offic...

By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). On...

This 8mm steel shaft is made of hardened C45 steel. In conjunction with an appropriate bearing and supports it would make for an ideal linear slid...

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a res...

These are addressable 1-meter-long 5V RGB LED strips that come packed with 60 APA102Cs. APA102 LEDs are very similar to WS2812s with a few caveats:...

The LSM6DS3 is an accelerometer and gyroscope sensor with a giant 8kb FIFO buffer and embedded processing interrupt functions, specifically targete...

The SparkFun Big Red Box Proto Board is a large, custom made PCB that has been specifically designed to be used with and installed into our Big Re...

Is this not the cutest little display for the Raspberry Pi? It features a 2.4" display with 320x240 16-bit color pixels and a resistive touch over...

You can now create a dazzling display with your Raspberry Pi Model A+/B+/Pi 2 with the Adafruit RGB Matrix HAT. This HAT plugs into your Pi and mak...

The Open Workbench Logic Sniffer is an open source logic analyzer with a USB interface. The hardware is designed for the SUMP open source logic ana...

Convert just about any battery pack to 5V with VERTER - our fresh new Buck-Boost power converter. VERTER can take battery voltages from 3-12VDC an...

This is a 3 wire slip ring, a remarkably simple electromechanical assembly that allows for electronic signals and power to be passed through its ro...

RFEMWSUB3G is an Expansion Module for RF Explorer. It can be plugged into your RF Explorer unit to extend the coverage to 15-2700 MHz (0.015-2.7GH...

4-digit 7-segment displays are really neat little devices, it's a shame that they can be so cumbersome to control. Well we've solved that problem b...

Once you have seen an OLED display in use you will never want to use an LCD again! Much brighter display, much better viewing angle and lower cu...

This 1-meter long strip contains 60 RGB LEDs that can be individually addressed using a one-wire interface, allowing you full control over the col...

The DMX-USB-RX-A8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 18VAC su...