MAGENTO IMPORT

Description: Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form a...

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project lo...

This is the latest DS18B20 1-Wire digital temperature sensor from Maxim IC. Reports degrees C with 9 to 12-bit precision, -55C to 125C (+/-0.5C). ...

Datasheet PDF

Apply heat to the solder joint with the solder tool to soften it for the suction device. Have the suction ready to go as soon as the solder is suff...

The LM117 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 1.5A over a 1.2V to 37V output range....

Standard 22 AWG stranded black wire. Use this for soldering wire or any project where you need flexible wire. Stranded wire is recommended for p...

Technical Specifications : Forward Voltage 3.3V Forward Current 25mA Luminous Intensity 18000mcd Diam...

Standard 22 AWG stranded red wire. Use this for soldering wire or any project where you need flexible wire. Stranded wire is recommended for pro...

The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatibl...

This is a joystick very similar to the 'analog' joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometer...

Technical Specifications: Nominal Coil Voltage 5V DC Max Allowable Current 2A max (30VDC) 1A max (125VAC ...

Introduction The SRF05 is an evolutionary step from the SRF04, and has been designed to increase flexibility, increase range, and to reduce cost...

Standard 22 AWG solid white hook up wire. Use this with your bread board or any project where you need sturdy wire. Comes in small spools of 25'.

These are 150mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (c...

Miniaturized receiver for IR control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter...

This is a simple 3 wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, bare ...

Bread Boards are excellent prototyping tools, in a very short time it is possible to build circuits, even complex ones, carry out tests and fine-t...

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you n...