MAGENTO IMPORT

Introduction The SRF05 is an evolutionary step from the SRF04, and has been designed to increase flexibility, increase range, and to reduce cost...

Standard 22 AWG solid white hook up wire. Use this with your bread board or any project where you need sturdy wire. Comes in small spools of 25'.

These are 150mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (c...

Miniaturized receiver for IR control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter...

Trinket may be small, but don't be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lo...

This little round on/off rocker switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It'll also look pretty slick...

This is a simple 3 wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, bare ...

It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bo...

Bread Boards are excellent prototyping tools, in a very short time it is possible to build circuits, even complex ones, carry out tests and fine-t...

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you n...

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch over...

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow. Features: Forward Volta...

This is a simple 4 wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare ...

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things ...

This Grove-ultrasonic sensor is a non-contact distance measurement module which is compatible with the Grove system. It's designed for...

If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.25W, 8Ohm speaker is only 40m...

Description: This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle ...

Momentary Switch. Normally Open. Color: black Mounting hole:7mm Length:27mm

Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for measuring whole building...

This Moisture Sensor can be used to detect the moisture of soil or judge if there is water around the sensor, let the plants in your...

This product is a high accuracy temperature and humidity sensor used in home conditions. It consists of a capacitive sensor e...