Motor & Servo Controllers/Motor Controllers

This tiny board is an easy way to use Toshiba's TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bip...

This tiny breakout board for TI's DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. With an operating ...

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+ and provides an easy and low-cost solution for driving a pair...

Technical Specifications: Voltage 5v logic supply and 5v - 24v for the motor Current 50mA Max for logic and up to 5A...

Technical Specifications: Voltage 12V Current Up to 2.8A for each motor Dimensions 71mm x 60mm Over...

Designed to work with our EMG49 gear motors, the MD49 will drive two motors. Controlled by Serial Interface at 9600 or 38400 baud. Two modes of ...

This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair ...

This is the version without the LM18200 chip, the user must install the chip before using the board. H Bridge TANK-3A HP is designed for motor...

The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only problem? ...

The MD04 is a medium power motor driver and is an upgraded replacement for the MD03, the main features are ease of use and flexibility. The motor's...

The MiniMoto is a great little breakout for the DRV8830 I 2 C DC motor driver. The MiniMoto is great for driving most small robotics. With an oper...

This small, inexpensive motor controller allows variable speed and direction control of two small, brushed DC motors using a simple serial inter...

Raspberry Pi Motor Driver Board v1.0 is based on the Freescale MC33932 dual H-Bridge Power IC, which can control inductive loads with currents up ...

The MD14 is a medium power motor driver, designed to provide the easiest motor control possible to a single motor. Adjustments to speed and accele...

The RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Ardiuno combination with v...

The SparkFun Serial Controlled Motor Driver (SCMD) is a DC motor driver that's been designed to drive small DC motors with ease. The SCMD is design...

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefit...

This powerful motor controller allows variable speed and direction control of two large, brushed DC motors using a simple serial interface and p...

This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V t...

This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration ov...

This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration ove...

The ETH0621 offers 6 digital inputs (accepting 10V - 24V), 2 independently switched 24V 5A outputs and a 24 volt, 5A motor controller that effortl...

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+ and provides an easy and low-cost solution for driving a pair...

This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges sup...