Motors

This is the motor you want if you are looking for a low cost unipolar stepper that needs to do some work. Motor Controller and Connection Th...

This coated steel mounting bracket provides a simple means of attaching a NEMA-17 sized stepper motor to a flat surface. It has two sets of mountin...

This NEMA-17 motor generates 3.6 Kg-cm of holding torque at 1.7 Amps. It comes with the rear shaft exposed, so you can mount anencoder or shaft cou...

This high-speed bipolar stepper with a rear shaft has a 1.8° step angle and 11 kg cm of torque at low speeds. This NEMA-23 motor generates 12.6 kg...

This coated steel mounting bracket provides a simple means of attaching a NEMA-23 sized stepper motor to a flat surface. It has two sets of mounti...

This NEMA-11 motor has an integrated Planetary gearbox with a 26 103 / 121 :1 ratio. It comes with the rear shaft exposed, so you can mount an enco...

This NEMA-17 motor has an integrated Planetary gearbox with a 50 4397 / 4913 :1 ratio. It comes with the rear shaft exposed, so you can mount an en...

This NEMA-17 motor has an integrated Planetary gearbox with a 13 212 / 289 :1 ratio. It comes with the rear shaft exposed, so you can mount an enco...

This NEMA-14 motor generates 1.4 Kg-cm of holding torque at 1 Amp. It comes with the rear shaft exposed, so you can mount anencoder or shaft coupl...

This coated steel mounting bracket provides a simple means of attaching a NEMA-11 sized stepper motor to a flat surface. It has two sets of mounti...

This NEMA-23 motor generates 12 kg-cm of torque at 2.8 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler. ...

This NEMA-11 motor generates 600 g-cm of holding torque at 0.67 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft c...

This NEMA-17 motor has an integrated Planetary gearbox with a 26 103 / 121 :1 ratio. It comes with the rear shaft exposed, so you can mount an enco...

This NEMA-17 motor has an integrated Planetary gearbox with a 99 1044 / 2057 :1 ratio. It comes with the rear shaft exposed, so you can mount an e...

This NEMA-23 motor has an integrated Planetary gearbox with a 76 49 / 64 :1 ratio. It comes with the rear shaft exposed, so you can mount an enc...

The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors. The 1062 can be us...

Note: This revision of the 1065 comes with a built-in heat sink for the driver chip to prevent it from overheating. The 1065 lets you control th...

The PhidgetAdvancedServo 8-Motor allows you to control the position, velocity, and acceleration of up to 8 RC servo motors. It requires a 6-15VDC...

This NEMA-23 motor has an integrated Planetary gearbox with a 4 1 / 4 :1 ratio. It comes with the rear shaft exposed, so you can mount anencoder or...

The 1067 – PhidgetStepper Bipolar HC allows you to control the position, velocity, and acceleration of one bipolar stepper motor. This is the produ...

This NEMA-34 motor generates 34 kg-cm of holding torque at 2.8 Amps. It comes with the rear shaft exposed, so you can mount anencoder or shaft cou...

The DCC1003 gives you complete control of two DC motors of up to 4 amps each from one of the ports on your VINT hub . You can control motor velocit...

If you're looking for a compact solution for controlling a medium-sized stepper motor, the STC1003 is an affordable and convenient option. You can...

The PhidgetMotorControl HC allows you to control the angular velocity and acceleration of up to two high-current DC motors. Many variations o...