Motors

This motor is much like the GM2 gear motor but runs at nearly twice the speed. Mechanical Features 143:1 gear reduction ratio 7mm output...

81:1, 454RPM, 20mA (220mA stall) at 6V gives 3.17in*oz torque. Not bad, huh? And only available from Solarbotics! These little gear motors me...

This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 9.96:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. T...

The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors. The 1062 can be us...

This is the version without the LM18200 chip, the user must install the chip before using the board. H Bridge TANK-3A HP is designed for motor...

Premium quality 4 Pin cable. Compatible with Dynamixel RX and DX servos and control devices (USB2Dynamixel, SMPS2, etc). 10pcs set

This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 100.37:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. T...

The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only problem? ...

The MD04 is a medium power motor driver and is an upgraded replacement for the MD03, the main features are ease of use and flexibility. The motor's...

This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 75.81:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. Th...

Want a more intuitive and tangible timer for your project? This mechanical timer is a quick, easy and inexpensive way! Compared to digital ones, m...

This copper alloy traveling nut is intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 sc...

The MiniMoto is a great little breakout for the DRV8830 I 2 C DC motor driver. The MiniMoto is great for driving most small robotics. With an oper...

This is our version of the OpenServo open-source servo controller board. It's meant to replace the existing controller board in any standard s...

This small, inexpensive motor controller allows variable speed and direction control of two small, brushed DC motors using a simple serial inter...

Raspberry Pi Motor Driver Board v1.0 is based on the Freescale MC33932 dual H-Bridge Power IC, which can control inductive loads with currents up ...

This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 98.78:1 metal spur gearbox, and it has an integrated 48 CPR quadra...

The MD14 is a medium power motor driver, designed to provide the easiest motor control possible to a single motor. Adjustments to speed and accele...

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor combined with a 62.5:1 metal s...

This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-sh...

The SparkFun Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or logic signal ...

The RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Ardiuno combination with v...

Technical Specifications: Voltage Separate terminals or from servo supply when 7.2v battery is used Number of Servant...