Motors

This gearmotor is a miniature high-power brushed DC motor with a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gea...

The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, ...

This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1000 mA at 2.7 V, allowing for a holding torqu...

This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque...

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 73:1 metal gearbox with a 0.276"-long, 4 mm-diamete...

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed DC motor with 75.81:1 metal gearbox, similar to Sanyo's popular 12 mm ge...

This powerful motor controller allows variable speed and direction control of two large, brushed DC motors using a simple serial interface and p...

This small, inexpensive motor controller allows variable speed and direction control of two small, brushed DC motors using a simple serial inter...

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, low-current motor with 10:1 metal gearbox, similar to Sanyo's popular 12 mm...

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, high-power motor with 30:1 metal gearbox, similar to Sanyo's popular 12 mm ...

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, high-power motor with 50:1 metal gearbox, similar to Sanyo's popular 12 mm ...

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, low-current motor with 100:1 metal gearbox, similar to Sanyo's popular 12 m...

The TReX blends RC, analog, and serial inputs for a powerful motor control solution capable of delivering a continuous 13 A per motor. The TReX ...

This lower-power, smaller, and lower-cost version of the TReX is the ultimate general-purpose motor controller for small motors: it has a wide o...

New Premium HSR-5990TG is the replacement of current HSR-5995TG. With accumulated know-how from Robot technology, HSR-5990TG shows more stable pe...

The DCC1002 gives you complete control of one medium to large DC motor from one of the ports on your VINT hub . You can control motor velocity, acc...

This is a DC sucker type electromagnet with 35kg holding force and 3W power. It should be operated at 5V. The magnetic poles of the electromagnet c...

Servant Channels - up to 84 Logic Outputs - up to 84 Logic Inputs - up to 84 10-bit Analog...

For RX64 Dynamixel Servos. Includes: - Thrust Horn: 1 pc - Wrench Bolt (M3*8) : 1 pc Thrust bearing and washers not include...

SPECIFICATIONS - This part is assembled on to the final wheel gear and is used to connect with others frames for the RX-64 - The center has...

Bracket for RX64 Dynamixel Servos, 4 screws and 4 nuts included. More informations about the Dynamixel System ->

Includes: - Horn Idle : 1 pc Only the Horn idle included More informations about the Dynamixel System ->

Includes: - Horn Idle : 1 pc - MF106ZZ Bearing: 1 pc - Cap Bearing: 1 pc - Wrench Bolt (M2.5*8) : 1 pc - Wrench Bolt (M2*3) : 6 pcs ...

This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges sup...