Motors

This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1000 mA at 2.7 V, allowing for a holding torqu...

Set of 5 nylon horns suitable for R/C standard servos.

The HS-81 and HS-81MG are among Hitec?s most popular servos. Available in both resin and metal gear versions. With a fine balance between speed and...

This is the motor you want if you are looking for a low cost unipolar stepper that needs to do some work. Motor Controller and Connection Th...

Hitec is pleased to introduce the new HS-755BB featuring the revolutionary Karbonite Gears. The 755 replaced the popular 700BB and offers stronger ...

This coated steel mounting bracket provides a simple means of attaching a NEMA-17 sized stepper motor to a flat surface. It has two sets of mountin...

Hitec HS-430BH is the substitute of HS-425 and is designed to work up to 7.4V, which is the perfect choice if you want to use 2 LiPo cells. Te...

This hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws...

This tiny breakout board for TI's DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it ...

The HS-85BB features a high power motor for greater speed and torque. Available in both resin and metal gear versions, the HS-85BB is the choice of...

VDR interference suppression on the collector Direction of rotation depending on polarity Can be mounted in any position Maximum radial s...

The Hitec research and development department has worked hard to develop an economical servo that surpasses its competitors and the new HS-40 Nano ...

The 12-channel Mini Maestro 12 raises the performance bar for serial servo controllers with features such as a native USB interface and internal s...

This tiny breakout board for TI's DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. With an operating ...

This NEMA-17 motor generates 3.6 Kg-cm of holding torque at 1.7 Amps. It comes with the rear shaft exposed, so you can mount anencoder or shaft cou...

The Sabertooth 2X25 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for high powered robot...

VDR interference suppression on the collector Direction of rotation depending on polarity Can be mounted in any position Maximum radial s...

Get your Arduino moving! This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robu...

Sabertooth 2X5 is the motor driver of choice for small differential-drive robots. It is ideal for smaller robots- up to 3lbs in combat or 25 lbs f...

VDR interference suppression on the collector Direction of rotation depending on polarity Can be mounted in any position Maximum radial...

The 5485HB is the latest addition to the Hitec digital line of servos offering improved performance over the 5475HB for even less money! The HS-...

The Big Easy Driver, designed by Brian Schmalz , is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is based on ...

Planetary gearmotor equipped with VDR noise suppressor. Output shaft supported by 2 ball bearings Characteristics Rated voltage: 12VDc Len...

Planetary gear motor. Motor interference suppression by VDR. Outgoing shaft two ball bearings supported Technical specifications Nominal vol...