Motors

SIX POLES MAGNET: THREE PULSES FOR MOTOR TURN HALL-EFFECT SWITCHES These Hall-effect switches are highly temperature stable and stress-resistan...

WP are completely water proof and the technology beside is patent pending. Those servos are designed to be used in boats, submarines and other ...

The Sabertooth 2X60 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for high powered robo...

Planetary Gearmotor with two phase Hall effect 90? encoder. SIX POLES MAGNET THREE PULSES FOR MOTOR TURN The sequence of the phases AB is obta...

This tiny breakout board for TI's DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an ...

This NEMA-17 motor has an integrated Planetary gearbox with a 13 212 / 289 :1 ratio. It comes with the rear shaft exposed, so you can mount an enco...

This NEMA-14 motor generates 1.4 Kg-cm of holding torque at 1 Amp. It comes with the rear shaft exposed, so you can mount anencoder or shaft coupl...

New microservo that replaces the HS81 MG, uses a more powerful motor and improved electronics. Uses the same spare parts as the HS81 MG (box, gear...

This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slot...

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, high-power motor with 30:1 metal gearbox, similar to Sanyo's popular 12 mm ...

Kangaroo x2 adds self-tuning feedback motion control to your Sabertooth or SyRen motor driver. It can be used with quadrature encoders or potentio...

SIX POLES MAGNET: THREE PULSES FOR MOTOR TURN HALL-EFFECT SWITCHES These Hall-effect switches are highly temperature stable and stress-resistan...

The EGM30 (encoder, motor, gearbox 30:1) is a 12v motor fully equipped with encoders and a 30:1 reduction gearbox. It is ideal for small or mediu...

This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator ...

The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. It is suitable for medium powered robo...

This coated steel mounting bracket provides a simple means of attaching a NEMA-11 sized stepper motor to a flat surface. It has two sets of mounti...

SIX POLES MAGNET: THREE PULSES FOR MOTOR TURN HALL-EFFECT SWITCHES These Hall-effect switches are highly temperature stable and stress-resistan...

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed DC motor with 75.81:1 metal gearbox, similar to Sanyo's popular 12 mm ge...

This NEMA-23 motor generates 12 kg-cm of torque at 2.8 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler. ...

A4983 driver can control stepper motors and have two channels. The board can also power gear motors. It might be supplied by voltage in the 6V to 3...

This NEMA-11 motor generates 600 g-cm of holding torque at 0.67 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft c...

This NEMA-17 motor has an integrated Planetary gearbox with a 26 103 / 121 :1 ratio. It comes with the rear shaft exposed, so you can mount an enco...