Phidgets

The IR Distance Adapter is designed to interface the Sharp GP2D12 sensor to the PhidgetInterfaceKit 8/8/8 or the PhidgetTextLCD. The Sharp GP...

The PhidgetSpatial 3/3/3 combines the functionality of a 3-axis compass, a 3-axis gyroscope, and a 3-axis accelerometer all in one convenient packa...

Analog Inputs The analog inputs are used to measure continuous voltage outputs generated by various sensors such as temperature, humidity, posit...

Digital Inputs The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range - 4 to 30VDC. They provide b...

Product Features Protects your PC from overvoltage Increases system stability Protects from overvoltages up to 1kV USB speed selectabl...

Shaft supports provide a mounting point to connect linear shaft to your structure. They allow for connection to surfaces parallel to the shaft. ...

Measures Relative Humidity from 10% to 95% with a typical error of ±2%RH at 55% RH. Measures Ambient Temperature in the range of -40°C to +100°...

This NEMA-23 motor has an integrated Planetary gearbox with a 76 49 / 64 :1 ratio. It comes with the rear shaft exposed, so you can mount an enc...

Note: This revision of the 1065 comes with a built-in heat sink for the driver chip to prevent it from overheating. The 1065 lets you control th...

The PhidgetBridge lets you connect up to 4 un-amplified Wheatstone bridges, such as: Strain gauges Compression load cells Pressure sensors...

The PhidgetRFID Read-Write reads RFID tags that are brought in close proximity to the reader and returns the tag identification number. Writing da...

This 8mm steel shaft is made of hardened C45 steel. In conjunction with an appropriate bearing and supports it would make for an ideal linear slid...

Thermocouples are widely used to measure extreme temperatures impossible to measure with other types of sensors. J, K, E and T thermocouples are...

The 4-20mASensors can be connected to and powered by the provided terminals on the 4-20mA Adapter board. The 1132 will measure the curren...

The PhidgetInterfaceKit 0/0/4 allows you to control high power devices such as incandescent light bulbs, fans, and pumps by electronically switchi...

The 1121 provides an interface to non-Phidgets resistance sensors such as: Force-Sensing Resistors (FSR), light sensors, thermistors (heat sensor...

The PhidgetAdvancedServo 8-Motor allows you to control the position, velocity, and acceleration of up to 8 RC servo motors. It requires a 6-15VDC...

The Phidget GPS provides the longitude and latitude of the board's position in signed decimal degree format. The position accuracy (best case) is ...

The 3851 Enclosure is designed to protect the following boards while still giving you access to the USB port through an opening in the enclosure: ...

The PhidgetSpatial Precision 0/0/3 is a 3-axis accelerometer that can measure up to ±8g of acceleration in each axis, and has high precision when ...

With its paper-thin construction, flexibility and force measurement ability, the Thin Force sensor can measure force between almost any ...

This 150cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hu...

Note: The 1041_0B is identical to the 1041_0, except that it comes pre-assembled in a plastic shell enclosure and you have the option of which leng...

Bridge-based sensors are a common type of resistive sensor that produces a very small voltage drop. Load cells, strain gauges, pressure sensors, a...