Phidgets

Product Features Maximum Load Capacity: 5kg Wheatstone Bridge Sensor Small: 55.25 x 12.7 x 12.7mm Plugs into the 1046 – Phidget...

Product Features Maximum Load Capacity: 50kg Wheatstone Bridge Sensor Small: 55.25 x 12.7 x 12.7mm Plugs into the 1046 – Phidget...

Product Features Maximum Load Capacity: 20kg Wheatstone Bridge Sensor Small: 55.25 x 12.7 x 12.7mm Plugs into the 1046 – PhidgetBri...

Product Features Maximum Weight: 780g Wheatstone Bridge Sensor Small: 45 x 9.3 x 6mm Plugs into the 1046 – PhidgetBridge 4-Inpu...

This is the motor you want if you are looking for a low cost unipolar stepper that needs to do some work. Motor Controller and Connection Th...

This coated steel mounting bracket provides a simple means of attaching a NEMA-17 sized stepper motor to a flat surface. It has two sets of mountin...

A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise location...

The 1108 is a Hall-effect sensor that provides a voltage output that is proportional to the applied magnetic field. Comes packaged with a 60cm S...

This 60cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hub...

Product Features Cable length: 30cm (12”) 24 AWG copper 30cm USB 2.0 Cable. 24 AWG copper Standard Mini-USB type A to US...

This RFID tag encased in a glossy white plastic card fits conveniently into a wallet and is ideal for access control or member tracking applic...

This coated steel mounting bracket provides a simple means of attaching a NEMA-11 sized stepper motor to a flat surface. It has two sets of mounti...

This tag is shaped like a keyfob so it can be conveniently attached to a keyring or lanyard. This is a blank tag- its ID must be chosen and wr...

This NEMA-23 motor generates 12 kg-cm of torque at 2.8 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler. ...

This NEMA-11 motor generates 600 g-cm of holding torque at 0.67 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft c...

The 1143 Light sensor can measure ambient light up to 70 kilolux (roughly equivalent to the brightness of direct sunlight). Each sensor has been in...

Product Features Maximum Load Capacity: 200kg Wheatstone Bridge Sensor Individually calibrated at the factory Plugs into the 1046 –...

Product Features Maximum Weight: 50kg Wheatstone Bridge Sensor Individually calibrated at the factory Plugs into the 1046 – Phidget...

Temperature sensor with a range of -50°C to +150°C with a typical error of ±0.75°C in the 0°C to 100°C range. Comes packaged with a 60cm Sens...

The 3561 roll ball switch will turn the digital input "on" when the roll ball is depressed, and will turn "off" when the ball is released. P...

This miniature joystick has two axes and a pushbutton. Each axis, up/down and left/right, has a potentiometer with a center value of approximatel...

The 1109 can be rotated 300 degrees and outputs a number between 0 and 1000 based on the shaft position. Comes packaged with a 60cm Sensor Cable....

The 1146 IR Reflective Sensor uses an infra-red LED and a phototransistor to measure the distance of an object between 1mm and 4mm away. This senso...

The Dual Relay Board allows digital outputs of the 1018 InterfaceKit 8/8/8, the 1202 Text LCD or the 1203 TextLCD to control larger loads and dev...