Phidgets

This sensor can detect the presence of a highly reflective object at 10cm. For less reflective objects (like hands) the distance is about 5cm. ...

The 1142 Light sensor can measure ambient light up to 1000 lux (roughly equivalent to the typical lighting in a studio, or the sky on an overcast d...

A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations...

This connector can be attached to any K-type thermocouple by securing the exposed wires into the screw terminals, allowing for simple, solderless ...

The 1122 measures AC current up to 30 Amps and DC Current from -30Amps to +30Amps. Dual outputs allow the user to measure both the AC and DC comp...

The PhidgetSpatial 0/0/3 is a 3-axis accelerometer that can measure up to ±8g of acceleration in each axis. It is an inexpensive alternative to the...

The 1120 FlexiForce Adapter makes it easy to interface a Tekscan FlexiForce Force Sensor to your PC. Just use the cable included with the adapte...

Product Features Cable length: 180cm (72") 24 AWG copper 180cm USB 2.0 Cable. 24 AWG copper Standard Mini-USB type A to US...

The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors. The 1062 can be us...

This 30cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hub...

Product Features Measures voltage from -30V to +30V Typical Error: ±0.7% The sensor is Non-Ratiometric. Product Descri...

A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations...

Product Features Measures the frequency of an analog or digital signal Measures zero-centered signals with a minimum amplitude of 110mV pe...

Product Description The PhidgetAnalog 4-Output Produces a voltage over -10V to +10V. This voltage will be asserted up to +-20mA. An error ...

This 10cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hub...

The 1133 measures sound across a very wide range, with a frequency range of 100Hz to 8kHz and pressure level from 50dB to 100dB. Product Spe...

The Solid State Relay is used to switch up to 2.5 Amps at up to 40 Volts DC, or 28 Volts AC. The SSR board is controlled by a digital output ...

The 1106 reads 0 when no force is applied. As force increases on the circular button the value increases towards 1000. It is intended as a us...

The thermocouple adapter lets you connect an Omega K-type Thermocouple with Miniature Male Connector to the: 1051 - PhidgetTemperatureSensor 1-...

This 90cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hub...

There are so many projects that require motor position control that Phidgets decided to make an inexpensive, reliable option. The ENC4109 is exact...

These linear bearings come preinstalled in a block to make it easy to mount equipment to them. The mounting holes are M4x8mm. Slide unit for 8...

These linear bearings need to be press-fit into the object you would like to slide on your rail or shaft. The outside diameter is 15mm so the hole...

This stainless steel probe type thermocouple is easy to install and plugs into a Phidgets thermocouple board. Measure -40 to 400°C with this sta...