Phidgets

This NEMA-14 motor generates 1.4 Kg-cm of holding torque at 1 Amp. It comes with the rear shaft exposed, so you can mount anencoder or shaft coupl...

The pH/ORP Adapter Interfaces to a pH or ORP glass electrode through a BNC connector and feeds the data to an Analog Input on a PhidgetInter...

This 350cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hu...

This coated steel mounting bracket provides a simple means of attaching a NEMA-11 sized stepper motor to a flat surface. It has two sets of mounti...

This tag is shaped like a keyfob so it can be conveniently attached to a keyring or lanyard. This is a blank tag- its ID must be chosen and wr...

This NEMA-23 motor generates 12 kg-cm of torque at 2.8 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler. ...

This NEMA-11 motor generates 600 g-cm of holding torque at 0.67 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft c...

The 1143 Light sensor can measure ambient light up to 70 kilolux (roughly equivalent to the brightness of direct sunlight). Each sensor has been in...

This NEMA-17 motor has an integrated Planetary gearbox with a 26 103 / 121 :1 ratio. It comes with the rear shaft exposed, so you can mount an enco...

Product Features Dongle Size 2 Analog Inputs with configurable data acquisition rates 2 Digital Inputs with hardware noise filteri...

The Slider 60 is a linear potentiometer - the resistance varies linearly with the position of the slider. SensorValue varies from 0 to1000 over t...

Product Features Maximum Load Capacity: 200kg Wheatstone Bridge Sensor Individually calibrated at the factory Plugs into the 1046 –...

This NEMA-17 motor has an integrated Planetary gearbox with a 99 1044 / 2057 :1 ratio. It comes with the rear shaft exposed, so you can mount an e...

This tag is a PVC plastic disc measuring 15mm in diameter. It can be glued to flat surfaces for object identification applications. This is a ...

Product Features Maximum Weight: 50kg Wheatstone Bridge Sensor Individually calibrated at the factory Plugs into the 1046 – Phidget...

Six Versatile I/O Ports With a VINT Hub Phidget, you can interface six devices to your computer through a single USB port. Each VINT port can pe...

The 3550 is an economical combination electrode ideal for your general-purpose applications in the lab or field. It has the impact-resistant q...

Temperature sensor with a range of -50°C to +150°C with a typical error of ±0.75°C in the 0°C to 100°C range. Comes packaged with a 60cm Sens...

Replacement USB Cable with custom locking connector. Used on PhidgetAccelerometer, PhidgetEncoder, Phidget Encoder HighSpeed, PhidgetCircular Tou...

The IR Distance Adapter is designed to interface the Sharp GP2D12 sensor to the PhidgetInterfaceKit 8/8/8 or the PhidgetTextLCD. The Sharp GP...

The 3561 roll ball switch will turn the digital input "on" when the roll ball is depressed, and will turn "off" when the ball is released. P...

This miniature joystick has two axes and a pushbutton. Each axis, up/down and left/right, has a potentiometer with a center value of approximatel...

The 1109 can be rotated 300 degrees and outputs a number between 0 and 1000 based on the shaft position. Comes packaged with a 60cm Sensor Cable....

The 1146 IR Reflective Sensor uses an infra-red LED and a phototransistor to measure the distance of an object between 1mm and 4mm away. This senso...