Phidgets

A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations...

Product Features Measures the frequency of an analog or digital signal Measures zero-centered signals with a minimum amplitude of 110mV pe...

Product Description The PhidgetAnalog 4-Output Produces a voltage over -10V to +10V. This voltage will be asserted up to +-20mA. An error ...

The 4-20mASensors can be connected to and powered by the provided terminals on the 4-20mA Adapter board. The 1132 will measure the curren...

The PhidgetInterfaceKit 0/0/4 allows you to control high power devices such as incandescent light bulbs, fans, and pumps by electronically switchi...

This 10cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hub...

The 1133 measures sound across a very wide range, with a frequency range of 100Hz to 8kHz and pressure level from 50dB to 100dB. Product Spe...

The Solid State Relay is used to switch up to 2.5 Amps at up to 40 Volts DC, or 28 Volts AC. The SSR board is controlled by a digital output ...

The 1121 provides an interface to non-Phidgets resistance sensors such as: Force-Sensing Resistors (FSR), light sensors, thermistors (heat sensor...

The 1106 reads 0 when no force is applied. As force increases on the circular button the value increases towards 1000. It is intended as a us...

The PhidgetAdvancedServo 8-Motor allows you to control the position, velocity, and acceleration of up to 8 RC servo motors. It requires a 6-15VDC...

The Phidget GPS provides the longitude and latitude of the board's position in signed decimal degree format. The position accuracy (best case) is ...

The thermocouple adapter lets you connect an Omega K-type Thermocouple with Miniature Male Connector to the: 1051 - PhidgetTemperatureSensor 1-...

This 90cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hub...

There are so many projects that require motor position control that Phidgets decided to make an inexpensive, reliable option. The ENC4109 is exact...

These linear bearings come preinstalled in a block to make it easy to mount equipment to them. The mounting holes are M4x8mm. Slide unit for 8...

These linear bearings need to be press-fit into the object you would like to slide on your rail or shaft. The outside diameter is 15mm so the hole...

This stainless steel probe type thermocouple is easy to install and plugs into a Phidgets thermocouple board. Measure -40 to 400°C with this sta...

The 3851 Enclosure is designed to protect the following boards while still giving you access to the USB port through an opening in the enclosure: ...

The PhidgetSpatial Precision 0/0/3 is a 3-axis accelerometer that can measure up to ±8g of acceleration in each axis, and has high precision when ...

With its paper-thin construction, flexibility and force measurement ability, the Thin Force sensor can measure force between almost any ...

This 150cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hu...

Note: The 1041_0B is identical to the 1041_0, except that it comes pre-assembled in a plastic shell enclosure and you have the option of which leng...

Bridge-based sensors are a common type of resistive sensor that produces a very small voltage drop. Load cells, strain gauges, pressure sensors, a...