1012 - PhidgetInterfaceKit 0/16/16
All prices are VAT included
The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range - 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.
The Open Collector Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a switch to ground, so the circuit you're switching will need an external power supply. Each output is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial power such as incandescent lights, high power LEDs, relays, solenoids, motors.
Board
| API Object Name | InterfaceKit |
| USB Voltage Min | 4.6V DC |
| USB Voltage Max | 5.5V DC |
| Current Consumption Min | 14 mA |
| Current Consumption Max | 500 mA |
| Available External Current | 394 Ma |
| Recommended Wire Size | 16 - 26AWG |
| USBSpeed | Low Speed |
| Operating Temperature Min | 0°C |
| Operating Temperature Max | 70°C |
Digital Inputs
| Number of Digital Inputs | 16 |
| Digital Input Impedance | 10kΩ |
| Low Voltage Max (False) | 900 mV DC |
| High Voltage Min (True) | 4.2V DC |
| Low Voltage Trigger Length Min | 16 ms |
| High Voltage Trigger Length Min | 4 ms |
| Digital Input Voltage Max | ±30V DC |
| Digital Input Update Rate | 125 samples/s |
Digital Outputs
| Number of Open Collector Digital Outputs | 16 |
| Series Resistance | 200mΩ |
| Open Collector Voltage Max | 30V DC |
| Digital Output Current Sinking Max | (per channel) 2 A |
- User Guides
- Open Collector Digital Output Primer
- Mechanical Drawings
- Download 3D Step File
- Programming Resources