Automation

The new version is available: ETH008-B - 8 relay outputs at 16A Overview The ETH008 provides eight volt free contact relay outputs with a c...

PRODUCT DISCONTINUED, REPLACED BY THE NEW VERSION The USB-RLY02 provides two volt free contact relay outputs with a current rating of up t...

The ETH002 provides two volt free contact relay outputs with a current rating of up to 16Amp each. The module is powered from a 12vdc supply which ...

Relays - 8 Isolated Inputs - 8 Power - Powered by standard USB bus Control interface - USB Input Voltage - 4.5v DC to 27v DC Relay current - Up to...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

ETH002 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH0...

The USB-RLY82 provides two volt free contact relay outputs with a current rating of up to 1Amp each. It is powered by any standard USB bus and has ...

The USB-RLY16 provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The processor is powered and instructed...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

Overview A low power version of the USB-RLY16 module, the USB-RLY16L is powered solely by the USB bus and provides eight volt free contact relay o...

ETH008 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH0...

Number of Relay's - 8 Power - 5v @ 100mA max. Control interface - Serial or I2C Relay current - ...

Overview The USB-OPTO-RLY816 provides eight optically isolated inputs and eight volt free contact relay outputs with a current rating of up to ...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

A good looking professional case for the ETH484 module. Includes mounting holes for fixing to a wall or back panel. This precision snap together c...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR42 is a WIFI connected relay module using the popular ESP32. It p...

The WIFI484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analogue inputs. The modu...

The ETH8020-B is a drop in update of the ETH8020 with additional upgrades. The ETH8020 provides 20 volt free contact relay outputs with a curren...

Controlled over Ethernet using simple TCP/IP commands. Relays - 4 Digital Switching I/O channels - 8 Analogue Inputs - 4 x 3.3v 12 bit or 10 bit f...

The MIDI-RLY8 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays....

Powered and Controlled by the USB bus. The relays used on this board are premium ultra low power 50mW coil types, this means the boards curren...

Powered and Controlled by the USB bus. Relays - 2 with integrated snubbing of the normally open terminals Power - Powered by standard USB bus Cont...