Automation

The Relay is a digital normally open switch that controls a relay capable of switching much higher voltages and currents than your normal Arduin...

The new version is available: ETH008-B - 8 relay outputs at 16A Overview The ETH008 provides eight volt free contact relay outputs with a c...

PRODUCT DISCONTINUED, REPLACED BY THE NEW VERSION The USB-RLY02 provides two volt free contact relay outputs with a current rating of up t...

The 3562 magnetic contact switch is very small and is designed for surface mounted installations. The switch handles gaps of up to 12mm (1/2...

The 1129 is a capacitive touch sensor and can detect a touch through plastic, glass, or paper. We recommend a material thickness of up to 1/2”. ...

This RC relay enables easy control of large, electrically isolated loads in radio control (RC) systems. The activation threshold and direction are...

The ETH002 provides two volt free contact relay outputs with a current rating of up to 16Amp each. The module is powered from a 12vdc supply which ...

The 3560 magnetic contact switch is nice and small and is designed for flush or countersink installations. The switch handles gaps of up to ...

Related Products We also carry two other Sharp distance sensors for longer distance ranges. 3521 - Sharp Distance Sensor GP2Y0A21YK0F...

This popular sensor made by Sharp produces an analog output that varies from 2.5V at 20cm to 0.4V at 150cm. The formula to translate S...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

Product Features Maximum Load Capacity: 100kg Wheatstone Bridge Sensor Individually calibrated at the factory Plugs into the 1046 –...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

ESP8266 is very highly integrated SOC which includes Xtensa LX106 core processor, RAM, RF front end and allow WIFI TCP-IP stack to be implemented o...

ETH002 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH0...

The pH/ORP Adapter Interfaces to a pH or ORP glass electrode through a BNC connector and feeds the data to an Analog Input on a PhidgetInter...

The USB-RLY82 provides two volt free contact relay outputs with a current rating of up to 1Amp each. It is powered by any standard USB bus and has ...

This 350cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hu...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

ETH008 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH0...

Number of Relay's - 8 Power - 5v @ 100mA max. Control interface - Serial or I2C Relay current - ...

Product Features Dongle Size 2 Analog Inputs with configurable data acquisition rates 2 Digital Inputs with hardware noise filteri...

The Slider 60 is a linear potentiometer - the resistance varies linearly with the position of the slider. SensorValue varies from 0 to1000 over t...

Overview The USB-OPTO-RLY816 provides eight optically isolated inputs and eight volt free contact relay outputs with a current rating of up to ...