Automation

dS378 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS378...

The PhidgetInterfaceKit 0/16/16 provides: 16 Digital Inputs - with hardware noise filtering - sensing up to 30VDC 16 Digital Outputs cont...

Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option of ASCII, Binary or Modb...

Powered and Controlled by the USB bus. Relays - 4 with integrated snubbing of the normally open terminals Power - Powered by standard USB bus Cont...

Take control of and monitor your world with our ultimate jack-of-all-trades Raspberry Pi HAT! We've pulled together a great set of features into...

Product Features For OEMs and Systems Integrators Small: DIP-36 package Includes a mini-USB connector Product Description Prov...

Regulate the power to a variety of electronics with this four Relay Shield for Photon ! The Relay Shield allows you to control any normal outlet...

Controlling the power circuits of as many as four separate devices is a snap with this relay module. Each mechanical relay can control a separate c...

If you need to read a whole bunch of logic-level signals, this input module adds sixteen active-high digital inputs using just one port on your VI...

The 1067 – PhidgetStepper Bipolar HC allows you to control the position, velocity, and acceleration of one bipolar stepper motor. This is the produ...

The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can have the current limit set individually, and the brig...

The HUB0001 is a drop-in replacement for the HUB0000, supported by Phidget22 version 1.8 or newer. HUB0001 will enable data rate increases of up t...

Measure relative humidity from 0 to 100% and temperature from -40°C to +85°C. Measure relative humidity and air temperature, in non-condensing e...

If the 3.3V digital output mode of your hub's VINT port is not powerful enough, or if you just need more digital outputs, this cost-effective outp...

The PhidgetSpatial Precision 3/3/3 combines the functionality of a 3-axis compass, a 3-axis gyroscope, and a 3-axis accelerometer all in one conve...

The 1134 - Switchable Voltage Divider is a voltage divider with switches. The switches can be used to control which resistors are used in the vo...

dS2832 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS283...

The MIDI-RLY8 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays....

With the VCP1100, you can quickly and easily measure the current flow in an electronic circuit or device. Just put this current sensor in series w...

If you're looking for a compact solution for controlling a medium-sized stepper motor, the STC1003 is an affordable and convenient option. You can...

The PhidgetEncoder Highspeed 4-Input can be used with a wide assortment of mechanical and optical encoders. The encoder should be of quadrature out...

The 1203 integrates a 20X2 White PhidgetTextLCD, and a PhidgetInterfaceKit 8/8/8 The PhidgetTextLCD allows you to display messages on a 2-...

The DAQ1000 allows you to connect up to eight analog sensors or devices. This Phidget connects to your computer through a VINT Hub. Features ...

Expansion board for the dScript modules providing low voltage DC inputs (analogue or digital) and two extra relays, powered and controlled through...