Automation

Product Features Maximum Load Capacity: 5kg Wheatstone Bridge Sensor Small: 55.25 x 12.7 x 12.7mm Plugs into the 1046 – Phidget...

Product Features Maximum Load Capacity: 50kg Wheatstone Bridge Sensor Small: 55.25 x 12.7 x 12.7mm Plugs into the 1046 – Phidget...

Product Features Maximum Load Capacity: 20kg Wheatstone Bridge Sensor Small: 55.25 x 12.7 x 12.7mm Plugs into the 1046 – PhidgetBri...

The new version is available: ETH008-B - 8 relay outputs at 16A Overview The ETH008 provides eight volt free contact relay outputs with a c...

PRODUCT DISCONTINUED, REPLACED BY THE NEW VERSION The USB-RLY02 provides two volt free contact relay outputs with a current rating of up t...

Product Features Maximum Weight: 780g Wheatstone Bridge Sensor Small: 45 x 9.3 x 6mm Plugs into the 1046 – PhidgetBridge 4-Inpu...

The ETH002 provides two volt free contact relay outputs with a current rating of up to 16Amp each. The module is powered from a 12vdc supply which ...

Relays - 8 Isolated Inputs - 8 Power - Powered by standard USB bus Control interface - USB Input Voltage - 4.5v DC to 27v DC Relay current - Up to...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

The 1108 is a Hall-effect sensor that provides a voltage output that is proportional to the applied magnetic field. Comes packaged with a 60cm S...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

This 60cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hub...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

Product Features Cable length: 30cm (12”) 24 AWG copper 30cm USB 2.0 Cable. 24 AWG copper Standard Mini-USB type A to US...

ETH002 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH0...

MOD-IO2 is stackable development board which adds RELAYs and GPIOs to any of our development boards with UEXT. If you work with any of our developm...

The USB-RLY82 provides two volt free contact relay outputs with a current rating of up to 1Amp each. It is powered by any standard USB bus and has ...

The USB-RLY16 provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The processor is powered and instructed...

Right out of the box - Simple configuration and setup from your web browser. Control it from a web page, or select tcp/ip control with an option o...

ETH008 houses. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH0...

Number of Relay's - 8 Power - 5v @ 100mA max. Control interface - Serial or I2C Relay current - ...

The 1143 Light sensor can measure ambient light up to 70 kilolux (roughly equivalent to the brightness of direct sunlight). Each sensor has been in...

Overview The USB-OPTO-RLY816 provides eight optically isolated inputs and eight volt free contact relay outputs with a current rating of up to ...

Overview A low power version of the USB-RLY16 module, the USB-RLY16L is powered solely by the USB bus and provides eight volt free contact relay o...